Best selling Audio effects
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Crown XTi 4002
There is no doubt – when you choose the XTi 2 series from Crown, you are selecting one of the most powerful and innovative amplifiers on the market today. The brand new XTi 2 series amplifiers continue to set the standard for unmatched performance and value, delivering top-notch results effortlessly night after night.
2. ART DualXDirect
The DualXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4" and XLR inputs (provided via "combo" jacks) are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DualXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DualXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
The input Attenuator switches allow for a wide range of signal levels and the input Thru jacks allow for tapping off of your signal chain. The Ground Lift switches let you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.
The DUALXDirect''s active circuitry is powered by phantom voltage from the output connections or by an internal 9V battery, when external power is not available. When powered by a battery, it draws less than 7.5 mA which should provide more than 100 hours of operation with a new battery (alkaline recommended). If phantom power is available, then the DUALXDirect will automatically draw its power from the external source. The Power On/Off switch lights more dimly when the unit is running off of the battery, lights more brightly when it is running off of phantom power, and is off when the unit is inactive.
The compact black-anodized all aluminum case and it's active design allow the DUALXDirect to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the DUALXDirect the obvious choice.
3. Img Stage Line Line Stereo Transducer
Professional stereo line transformer for reducing signal interference and ground loops that can occur when connecting PC sound cards to hi-fi systems or mixing consoles.
- Galvanically isolated inputs and outputs
- Gold-plated RCA connectors (600 Ω)
- Frequency range 20-20000 Hz
- Robust, stage-ready metal housing with excellent shielding properties
- Dimensions 125 x 55 x 75 mm
- Weight 650 g
SOUNDCHECK 07/2007 on FGA-102, FGA-202, LC-31, MC-31, and LSP-102: “Every musician or sound technician should have these little helpers in their toolkit. They stand out sonically by their positive unobtrusiveness. Solid metal housings and the functionality of these transformers ensure that many problems on stage and in the rehearsal room are solved cost-effectively.” tools4music 06/2009 on LSP-102, LC-31, FGA-102, FGA-202, DIB-102: “Recommended and roadworthy. Affordable audio helpers for the 'always on hand' tool case.”.
4. UNiKA Pro-USB
The UNiKA PRO-USB is a professional passive DI box designed to convert digital USB audio signals from devices such as mobile phones, tablets, laptops, computers, and other digital audio sources into low-impedance balanced analog signals required by mixers, sound cards, preamps, or active speakers. The PRO-USB is powered via USB-C, eliminating the need for batteries or other power supplies. The specially selected audio isolation transformer and the built-in 32 Bit / 192kHz Digital Audio Converter (DAC) ensure an exceptionally musical sound rich in harmonics. The PRO-USB features a high-quality headphone output for monitoring and troubleshooting, with a beat LED that blinks in sync with the music. With its robust steel housing, full-area anti-slip mat, and recessed connectors, the UNiKA PRO-USB is equally at home on stage and in the studio. The USB-C connection delivers digital audio from the USB port to the built-in Digital Audio Converter (DAC) in the UNiKA PRO-USB. The sample rate reaches up to 192kHz / 32Bit, and most common lossless and compressed digital audio formats are automatically converted. Input: USB-C (via PC, tablet, smartphone, etc.), Output: 2 x XLR ISO Transformer, 3.5mm Stereo Headphone Monitor (16–600Ohm), Powered via USB-C, 32Bit / 192kHz DAC, 2x DSD, Ground Lift, Power LED, dimensions 78 x 124 x 46mm, weight 640g.
5. Two Notes Opus
The Two Notes Opus is a versatile effects pedal that functions as an amp and cab simulator. It combines advanced amplifier and speaker simulation technologies in a compact housing, making it an ideal solution for musicians seeking high-quality sound in a portable format. With Tube-Stage Modeling Technology (TSM), the Opus offers a wide range of tonal possibilities, from clear, clean tones to powerful high-gain sounds. The integration of Bluetooth and USB-C allows for easy control and editing via the Torpedo Remote App, making sound customization even more user-friendly. The pedal is equipped with 99 preset memory slots, enabling users to quickly recall their preferred settings. Additionally, the Opus offers a variety of DSP processors and effects that further enrich sound design.
- 5 premium preamp simulations for versatile sound shaping
- 32 virtual DynIR cabinets for realistic cabinet simulations
- MIDI integration for expanded control options
- Easy sound customization via the Torpedo Remote App
- OLED display for clear visibility and simple operation.
6. Behringer PA amplifier EP4000 RMS power
Extremely powerful and musical amplifiers that never let you down, even in the toughest conditions. From the deepest sub-bass to the finest overtones, the Europower always impresses with a transparent and voluminous sound.
7. Behringer Ultragraph Fbq-Pro Fbq6200
High-resolution 31-band stereo graphic equalizer with FBQ feedback detection system. Professional audio engineers have known for decades that a good EQ makes a crucial difference in the perception of a performance. Although graphic multiband equalizers have been around for a long time, they have hardly changed – until now! The ULTRAGRAPH PRO FBQ6200HD brings the graphic equalizer into the realm of high-definition audio, offering robust features along with our proprietary FBQ Feedback Detection System – at a price that makes it a must-have for anyone recording or operating a live sound system.
- Audiophile 31-band stereo graphic equalizer for live and studio applications
- The revolutionary FBQ feedback detection system instantly displays critical frequencies and can also be used as an audio analyzer
- Extremely low-noise 4580 operational amplifiers for maximum signal integrity
- Dedicated limiters with gain reduction meters for each channel protect your sound system from overload and distortion
- Pink noise generator provides test signals to adapt your sound system to any room acoustics
- Mono subwoofer output with dedicated level control and adjustable crossover frequency
- Additional tunable high-pass and low-pass filters for each channel eliminate unwanted frequencies, such as rumble, hiss, etc.
- High-precision 8-segment LED input/output display and input gain control for easy level adjustment
- Relay-controlled hard bypass with auto-bypass function in case of power failure
- Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
- "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response, and low power consumption for energy savings.
8. TC Helicon Mic Mechanic II
Awesome sound as soon as you step up to the mic. Ultra-simple battery-powered vocal effects stompbox with reverb, echo, and pitch correction. Eight high-quality reverb and echo presets. Separate reverb (room, studio, hall) and delay (tap and slap), with combinations of both. Footswitch tapping can match echoes to song tempo. Tone button for adaptive EQ, compression, de-essing, and gating. Battery operation (batteries optional).
Auto chromatic pitch correction. Easy connection between standard mic and mixer. Phantom power always available. Low noise microphone preamp. Automatic input gain - no more setting and adjusting input gain.
Mic control for remote on/off switching with optional TC-Helicon MP-75, MP-76 (main button only) and Sennheiser e835 FX mics. Individual style select/mix controls for reverb and echo. Rugged all-metal construction. USB connection to VoiceSupport application offering updates, product-specific news, and more.
9V operation (vs 12V) to accommodate common pedalboard power supplies. Ultra-simple vocal effects stompbox with reverb, echo, and pitch correction. Gives you flexible, creative control in a battery-powered format. Vocally tuned reverb places your voice in the perfect musical space. High-quality, low-noise mic preamp for pristine vocals. Timed repeats of your vocal add interest at just the right moment. Effortless auto-chromatic pitch correction helps you sing in tune. Optional battery power operation lets you reduce cord clutter onstage and be extra mobile. Adaptive tone for perfect EQ, compression, de-essing, and gating keeps your vocals front and center in the mix.
9. Omnitronic Passive DI Box 2-Channel LH-061
The Omnitronic LH-061 PRO is a passive 2-channel DI box designed for use in professional audio applications. It allows for the conversion of two unbalanced line signals, such as those from CD players or instruments, into balanced XLR output signals. This is particularly useful for connecting to mixing consoles in recording studios or at live events. The DI box features a switchable input attenuation that enables adjustment of the signal strength as needed. A ground lift switch helps to avoid signal interference and ground loops, enhancing sound quality. The modern housing design with rubber corners ensures stability and protection, while the option to route cables underneath the housing facilitates handling. With a frequency response of 15 to 30,000 Hz, the LH-061 PRO is versatile and meets the demands of audio professionals.
- Passive 2-channel DI box with split mode
- Switchable input attenuation: 0 dB, -20 dB, -40 dB
- Ground lift switch to avoid signal interference
- Modern housing design with rubber corners for secure placement
- Stackable with cable management underneath the housing.
10. Skytec Power amplifier SPL 1000
Power amplifier with 2x 500 watts. 2x 500 watts output power. 3-band equalizer. Front-facing MP3 input and 3 rear line inputs. Input selector switch and peak clip indicator. Blue LED front lighting. Frequency range: 20 - 20,000 Hz. The Skytec SPL 1000 is a successful blend of HiFi and PA amplifier. The connection options are inspired by the HiFi sector. You can connect all components from your home entertainment system, from the computer to the MP3 player and even the television, to the amplifier via RCA line and 3.5 mm audio jack connections. From the PA amplifier, the Skytec SPL 1000 inherits robust performance specifications and a 48 cm rack-compatible design. With this power range, the amplifier is ideally suited for hosting small to medium-sized events in private and small business settings.
Product order
See all products