Best selling Thermal pads from Thermal Grizzly
On this page you'll find a ranking of the best Thermal Grizzly products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Thermal Grizzly KryoSheet
Thermal Grizzly presents KryoSheet, a new product that is part of the company's advertised high-performance cooling solutions. The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative to thermal pastes from the higher performance segment. Similar to the Carbonaut pads, they have an adaptable surface with very high thermal conductivity.
The KryoSheet is compatible with:
- AMD CPUs: Socket AM5
- Nvidia GPUs: RTX 2080 ti, Titan RTX.
2. Thermal Grizzly Minus Pad 8
The high-performance thermal pads of the Thermal Grizzly Minus Pad series feature a highly elastic and adaptable surface with very high thermal conductivity. This allows for excellent compensation of even the smallest component discrepancies. Available in various sizes and thicknesses.
Thermal pads
Quantity discount
CHF13.60 per piece for 2 units
Thermal Grizzly Minus Pad 8
1 mm, 8 W/m K
3. Thermal Grizzly Minus Pad 8 (100x100x2mm)
The easy to process and flexible minus pads consist of different components: They are based on a ceramic-silicone formula complex, nano-aluminum oxide. The pads thus always guarantee optimum heat transport.
Even the slightest contact pressure is sufficient for optimum fastening. All pads are environmentally friendly and RoHS compliant.
W/mK 8.0, temperature range -100°C / +200°C
4. Thermal Grizzly PhaseSheet PTM - 50x40mm
The phase-change material on which the PhaseSheet PTM is based is solid at room temperature. The material only begins to liquefy at temperatures above 45 degrees Celsius. A high contact pressure of around 300-400N is required for optimum distribution of the liquid PhaseSheet PTM and thus the lowest possible layer thickness. PhaseSheet PTM has a very low viscosity in its liquid state and contracts again when it changes to a solid material. This minimises the pump-out effect. The pump-out effect is particularly pronounced when combining a copper cooler on a graphics chip because silicon and copper have different linear expansion when heated. The temperatures under load cause the heat spreader and the base plate to deform (concave or convex) and return to their original shape (straight) during cooling. As a result, the thermally conductive paste is slowly pressed out between the heatspreader and the base plate of the CPU cooler, for example. PhaseSheet PTM is more durable than traditional thermal pastes, but not as durable as KryoSheet, for example, which is virtually maintenance-free. The maximum thermal conductivity of PhaseSheet PTM develops and stabilises after around ten heat cycles above 60 degrees Celsius. Brief information Outstanding thermal conductivity Consistently high performance Very long service life Versatile in use Non-electrically conductive Easy to use Scope of delivery 1x PhaseSheet PTM.
5. Thermal Grizzly Minus Pad 8 120x20x0.5mm, pack of 2
The easy-to-process and flexible pads are made from various components: they are based on a ceramic silicone formula complex and nano-aluminum oxide. This ensures optimal heat transfer at all times. Dimensions: 120 x 20 x 0.5 mm.
Thermal pads
Quantity discount
CHF6.25 per piece for 2 units
Thermal Grizzly Minus Pad 8 120x20x0.5mm, pack of 2
0.50 mm, 8 W/m K
6. Thermal Grizzly Minus Pad Basic - 120x20x1,0 mm (4er Pack)
The Thermal Grizzly Minus Pad Basic is a high-quality thermal pad specifically designed for efficient heat transfer in electronic devices. With dimensions of 120x20x1.0 mm, it provides an optimal solution for cooling components that generate high temperatures. The pad is made from a flexible material that easily adapts to various surfaces, ensuring uniform heat distribution. The package includes four pads, offering a cost-effective way to cover multiple applications. The use of thermal pads is particularly important in the computer and electronics industry to extend the lifespan of devices and optimize performance. The Minus Pad Basic is a reliable choice for those who value quality and efficiency.
- Excellent thermal conductivity for efficient cooling
- Flexible material for easy adaptation to various surfaces
- Supplied in a convenient 4-pack for versatile applications.
7. Thermal Grizzly Carbonaut thermal pad - 38 × 38 × 0.2 mm
To achieve these goals, Thermal Grizzly has worked closely with and tested the well-known extreme overclocker Roman "der8auer" Hartung during product development, developing chemical compounds and analyzing competitors.
The features of the Thermal Grizzly Carbonaut thermal pad at a glance: Reusable, non-adhesive heat-conducting pad. Made of carbon-based polymer with nanoparticles. Extremely high thermal conductivity of 62.5 W/(m-K). 0.2 mm thick and 38 × 38 mm Intel CPUs for Socket 2066 and AMD CPUs for Socket AM4. Attention. Please observe the manufacturer's warnings before use. The Carbonaut is electrically conductive and is therefore not suitable for use on MOSFETS or voltage converters.
8. Thermal Grizzly Pad Basic - 100x100x1,0 mm (2er Pack)
The Thermal Grizzly Minus Pad Basic is a high-quality thermal pad specifically designed for efficient heat transfer in electronic devices. With a thickness of 1.0 mm and a square shape of 100 x 100 mm, it provides optimal coverage for various applications. This product comes in a convenient 2-pack, allowing for flexible use. The pads are ideal for use in computers, graphics cards, and other electronic components where effective heat dissipation is crucial. The use of thermal pads helps to lower operating temperatures and extend the lifespan of devices. The easy handling and high thermal conductivity make these pads an excellent choice for tech enthusiasts and professionals.
- High thermal conductivity for efficient heat transfer
- Easy application in various electronic devices
- Delivered in a convenient 2-pack for flexible use.
9. Thermal Grizzly TG Minus Pad Pro - 120x20x1,5 mm 2 pcs
The Thermal Grizzly Minus Pad Pro is a high-performance thermal pad specifically designed for efficient heat transfer in electronic devices. With a thickness of 1.5 mm and a size of 120 x 20 mm, it offers optimal adaptation for various applications. This product is ideal for use in the computer and electronics industry, where effective heat dissipation is crucial to ensure the performance and longevity of components. The Minus Pad Pro is characterized by its high thermal conductivity, which enables improved cooling and thus prevents overheating. It comes in a convenient 2-pack, allowing for flexible use in different projects. The use of high-quality materials ensures reliable and durable performance, while the easy handling guarantees a straightforward installation.
- High thermal conductivity for efficient heat transfer
- Optimal adaptation for various electronic applications
- Easy handling and installation.
10. Thermal Grizzly TG Minus Pad Pro - 100x100x2,0 mm
The Thermal Grizzly Minus Pad Pro is a highly advanced thermal pad specifically designed for applications where efficient heat transfer is essential. With improved thermal conductivity compared to its predecessor, the Minus Pad 8, this product offers an optimal solution for cooling electronic components. The innovative composition of the pad ensures that it seamlessly conforms to surfaces, providing uniform heat distribution. The Minus Pad Pro is versatile and suitable for use in computer technology as well as in other areas where effective heat dissipation is crucial. Its combination of flexibility and stability makes it an ideal choice for demanding applications.
- Enhanced thermal conductivity compared to the predecessor
- Optimal surface conformity for uniform heat distribution
- Versatile use in various technical applications.
