Network switches
CHF124.95
Extralink VIRTUS V3 Unmanaged L2 Fast Ethernet (10/100) Power over Ethernet (PoE) 1U
16 ports
Best selling Network switches from Extralink
On this page you’ll find a ranking of the best Network switches from Extralink. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Extralink VIRTUS V3 Unmanaged L2 Fast Ethernet (10/100) Power over Ethernet (PoE) 1U
VIRTUS V3 is a PoE switch with 16 10/100 Mbps PoE ports, 2 Gigabit uplink ports, and 1 SFP port. The Extralink VIRTUS V3 is perfect for powering IP cameras, wireless access points, or IP phones. The VIRTUS V3 switch supports 4 operating modes.
In AI VLAN mode, ports 1-16 are isolated from each other, effectively stopping broadcast storms and improving network performance. In AI Extend mode, the effective transmission distance for data and PoE power to ports 1-8 can reach up to 250 meters, which is extremely useful for powering cameras that are far from the switch. In AI PoE mode, the switch automatically detects the operational status of the device and resets the power supply if a fault is detected. In AI QOS mode, video data is processed with priority.
Device power is supplied via an Ethernet cable (PoE). VIRTUS V3 supports the IEEE 802.3af/at standards and automatically detects devices that require PoE power to ensure that non-PoE devices are not damaged. The total power budget for the PoE ports is 150 W. The switch requires no additional configuration and is ready to use right out of the box. The included mounting brackets allow for installation in a standard rack.
Mode buttons:
- AI Extend: Ports 1-8 support PoE power up to 250 meters (recommended cable: Cat 5 or higher).
- AI VLAN: Isolates ports 1-16 from each other, effectively stopping network storms and improving performance.
- AI QOS: Provides priority for identified video data, making video transmission smoother. Ideal for video surveillance.
- AI PoE: Automatically shuts off power and restarts the device in case of detected inactivity.
2. Extralink Chiron | Switch | 24x RJ45 1000Mb/s, 4x SFP+, L3, managed
Extralink Chiron - Gigabit switch with SFP ports
Extralink Chiron is a 24-port next-generation Layer 3 switch. It targets IP MAN (metropolitan area network), government and corporate networks, and Internet cafes. It is developed on the basis of high-performance hardware and supports features such as efficient ACLs, flexible QinQ, 1:1 or N:1 VLAN switching, Ethernet OAM, carrier-level QoS, and industry-level 10GE Ether-ring. It also supports Layer 3 routing protocol.
High reliability
Based on an advanced distribution mechanism and an efficient cross-physical link aggregation function, the logic control plane, service control plane, and service data plane are separated. This allows Extralink Chiron to support continuous routing redirection at Layer 3, avoiding service interruption due to a single failure.
Telecommunications level Ethernet switch
Chiron supports telecom-level Ethernet protection protocol with less than 50 ms protection offset time, STP/RSTP/MSTP, active and backup uplinks, and LACP link aggregation to ensure high service reliability. It provides an excellent Ethernet OAM mechanism for real-time network health monitoring for rapid problem localization and detection. It supports In-Service Software Upgrade (ISSU) to ensure uninterrupted data transfer during system upgrades. It supports various L2 multicast functions, including IGMP-Snooping, fast-leave, and trans-vlan.
Excellent security mechanisms
The advanced hardware infrastructure design implements tier-based packet scheduling and packet protection, prevents DoS and TCP attacks related to SYN flood, UDP flood, broadcast storm, or heavy traffic, and supports tier-based command-line protection, giving different levels of users different management privileges.
Network switches
CHF239.95
Extralink Chiron | Switch | 24x RJ45 1000Mb/s, 4x SFP+, L3, managed
24 ports
3. Extralink Perses
Extralink Perses is a 10-port PoE switch with four operating modes: AI QoS mode, AI VLAN mode, AI Extend mode, and Smart Power mode. The AI QoS mode is ideal for surveillance applications, ensuring that video data is processed with the highest priority for smooth image quality. In AI VLAN mode, ports 1 to 8 are isolated from each other, effectively suppressing broadcast storms and improving network performance. The AI Extend 1-8 mode allows ports to transmit data and PoE power up to 250 meters, making it perfect for surveillance systems, cameras, and access points. In AI PoE mode, the switch automatically detects the operational status of the connected device and will automatically restart it if it determines that it is not functioning properly. The device supports the IEEE 802.3af/at standard, which automatically detects and identifies PoE devices compliant with the IEEE 802.3af/at standard and supplies them with power. You do not need to worry about the possibility of damaging a device that cannot be powered over PoE, as the switch will recognize if the device does not comply with the 802.3af/at standard and will not supply power to it.
4. Extralink Chiron Pro | PoE Switch | 24x RJ45 /s PoE, 4x SFP+, L3, managed
Extralink Chiron - Gigabit PoE Switch with SFP Ports
The Extralink Chiron Pro is a 24-port Layer 3 switch featuring next-generation PoE power supply. It is designed for IP MAN (Metropolitan Area Network), government and enterprise networks, as well as internet cafes. Built on powerful hardware, it supports features such as efficient ACLs, flexible QinQ, 1:1 or N:1 VLAN switching, Ethernet OAM, carrier-grade QoS, and industrial 10GE Ether-Ring. Additionally, it supports Layer 3 routing protocols.
High Reliability
Based on an advanced distribution mechanism and an efficient aggregation function over physical links, the logical control layer, service control layer, and service data layer are separated. This allows the Extralink Chiron Pro to support continuous Layer 3 routing redirections and avoid service interruptions due to a single point of failure.
Telecommunications-Level Ethernet Switch
The Chiron Pro supports telecommunications-level Ethernet protection protocols with a protection delay of less than 50 ms, STP/RSTP/MSTP, active and backup uplinks, as well as LACP link aggregation to ensure high service reliability. It provides an excellent Ethernet OAM mechanism for real-time monitoring of network health, enabling quick problem localization and detection. It supports In-Service Software Upgrade (ISSU) to ensure uninterrupted data transfer during system upgrades. Additionally, it supports various L2 multicast functions, including IGMP snooping, fast leave, and Trans-VLAN.
Network switches
CHF199.–
Extralink Chiron Pro | PoE Switch | 24x RJ45 /s PoE, 4x SFP+, L3, managed
24 ports
5. Extralink EX.9816 24 Port CAT6 UTP Patch
Extralink Patch Panel 24 Ports Cat. 6 UTP 1U
The patch panel is one of the fundamental elements used for structured cabling. It is installed in 19" racks. The screws used for mounting are the same as those for active devices. The purpose of the patch panel is to terminate the cables leading to the distribution cabinet.
The RJ45 Cat. 6 UTP patch panel ports connect to the active device via patch cables of the corresponding category to maintain the appropriate connection standard. The cable is connected to the patch panel using a punch-down tool.
6. Extralink EX.32787
The Extralink Outdoor PoE Switch Atlas is a powerful unmanaged rack switch specifically designed for use in demanding network environments. With eight RJ45 ports supporting speeds of up to 1000 Mbps, this switch enables efficient data transmission and is ideal for integration into existing network infrastructures. Additionally, the switch features two SFP ports, allowing flexible connections to various network devices. It is equipped with active cooling to ensure optimal performance and longevity, even under heavy loads. With a switching capacity of 20 Gbit/s and a MAC address table that supports up to 16,384 entries, the Atlas is capable of providing high efficiency even in large networks. The PoE standard 802.3af allows connected devices to be powered via the Ethernet cable, simplifying the installation and operation of IP cameras, access points, and other PoE-enabled devices.
- Active cooling for improved performance and longevity
- Quality of Service (QoS) for optimized network performance
- PoE budget of 120 watts to power connected devices
- High switching capacity of 20 Gbit/s for efficient data processing
- Support for up to 16,384 MAC addresses for large networks.
7. Extralink Ceres EX.3906
Extralink Ceres is a PoE switch with 10 ports and 4 operating modes: AI QoS, AI VLAN, AI Exten, and Smart Power Mode. The AI QoS mode is ideal for use in surveillance, ensuring smooth image quality by processing video data with the highest priority.
8. Extralink EX.32794
The Extralink Outdoor PoE Switch Minos is a powerful networking solution specifically designed for outdoor use. With eight RJ45 ports supporting Gigabit speeds of up to 1000 Mbps, this switch enables efficient data transmission for various applications. The integrated Power over Ethernet (PoE) function with a budget of 200 watts allows connected devices such as IP cameras or access points to be powered directly through the Ethernet cable, simplifying installation and eliminating the need for additional power sources. The switch is fully manageable and offers a switching capacity of 20 Gbit/s, ensuring high performance and flexibility in network management. With two SFP ports, additional network connections can be established via fiber optics, further enhancing the network's range and speed. Active cooling ensures that the switch operates reliably even under demanding conditions.
- Fully manageable PoE switch with Layer 2 functionality
- Active cooling for reliable operation under various conditions
- IGMP Snooping V3 for traffic optimization
- High MAC address table with 16,384 entries for extensive networks
- Quality of Service (QoS) for prioritizing network traffic.
9. Extralink HEXON 16 prievadų "FastEthernet" nevaldomas darbalaukio jungiklis
Extralink Hexon 16-Port Switch with 10/100Mbps Ports
The Extralink Hexon is an 8-port 10/100Mbps unmanaged Ethernet switch that provides a powerful Ethernet networking solution. The Extralink Hexon features 8 RJ45 ports with a throughput rate of 10/100Mbps and automatic negotiation. It is a highly integrated, portable, and user-friendly device suitable for both small and medium-sized offices as well as home networks.
Data Security
The switch uses store-and-forward technology, which combines dynamic memory allocation to efficiently distribute data to each port. While the switch transmits and receives data, flow control ensures that no data is lost. LEDs indicate power and network status.
Network switches
CHF25.70
Extralink HEXON 16 prievadų "FastEthernet" nevaldomas darbalaukio jungiklis
16 ports
10. Extralink 48 Core Fibre Optic Patch Panel Grey Duplex Holes
Extralink Fiber Patch Panel for 48 fibers (24 SC Duplex). The patch fiber optic panel is used to terminate fiber optic cables and switch fiber connections. The panel is designed for mounting in 19" racks. The pull-out design allows easy access to the interior of the patch panel without having to remove it from the rack rails. The panel is used to organize fiber optic cables with adapters, pigtails, and splice trays.
The entire unit is made of sheet steel and is powder-coated. Inside, there is a screw fixation for the splice trays and organizers for cable management.
On the back of the panel, there are 4 holes for throttles and 20 outlets for thin waste cables.
Product order
See all products