Network accessories
CHF33.35
MikroTik RBGESP - Gigabit Ethernet surge protector in IP68 waterproof enclosure
Overvoltage protection adapter
Best selling Network accessories from MikroTik
On this page you’ll find a ranking of the best Network accessories from MikroTik. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. MikroTik RBGESP - Gigabit Ethernet surge protector in IP68 waterproof enclosure
RBGESP - Gigabit Ethernet Surge Protector in Waterproof IP68 Housing
You can't buy safety, but you can purchase an RBGESP surge protector to keep your setup secure. The RBGESP is a Gigabit Ethernet surge protector that shields your network from lightning or surge damage.
A typical use case might look like this: you have a mast with several antennas and switches at the base. Install the GESP surge protection devices at each end. They come sealed in a new and improved weatherproof IP68 housing. Your antennas are now safe during a thunderstorm.
Don't forget the grounding cable! Attach it to the rack, the mast, or another structure that is connected to the ground. For maximum protection, you should use a surge protector at both ends of long cables.
The GESP units can usually absorb multiple surges. However, check their condition after each surge. For mounting GESP units, we recommend using PVC cable ties (but not too tightly).
Hope for the best, prepare for the worst. This small investment can save you a lot of time and money. So why take the risk? Grab a GESP for added safety!
Included Parts:
- K-73 Mounting Kit
Certification & Approvals:
- Certification: IP68.
2. MikroTik RMK-2/10
RMK-2/10 enables the installation of two of the smaller MikroTik devices in a traditional 19-inch rack, such as the practical and handy SR-10U. Alternatively, part of the bracket can be permanently removed to install a single 200 mm device in a classic 10-inch rack.
3. MikroTik QMP-LHG - quickMOUNT PRO for LHG antennas
Mikrotik QMP-LHG - quickMOUNT PRO for LHG antennas
The quickMOUNT pro is an advanced wall or pole mount adapter for small point-to-point and sector antennas.
The quickMOUNT pro gives you the possibility to turn the antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro, it is possible to perfectly set the antenna alignment using the integrated graduated scale.
- Its simple and low cost
- Adjustable horizontally and vertically
- Wall or pole mountable
- Two models available, one for SXT, OmniTIK, BaseBox or any other pole mountable device via the included adapter. A special model is also available for LHG
The quickMOUNT is very durable due to its special plastic composite material - anvilNITE(TM).
Specifications
- Product code: QMP-LHG
- Dimensions: 95 x 88 x 112 mm
- Tube diameter: 35 mm
- Max tube diameter to which mount can be attached: 65 mm
- Maximum antenna weight: 1.5 kg
- Maximum wind load: 100 N
- Turn angle for MikroTik products: 140°
- Compatible devices:
- QMP-LHG: LHG 5
- Material: anvilNITE(TM)
Includes:
- 4x M6x20 button head screw
- 4x 6x30 mm wall anchor
- 4x Self tapping screw
- 4x M6 locking nut
- 50-70 mm hose clamp.
Network accessories
−12%
CHF8.40 was CHF9.50
MikroTik QMP-LHG - quickMOUNT PRO for LHG antennas
Wall mount
4. MikroTik JIROUS JH-AF60 Radomové zakrytování pro AF60 a GBE-LR, 2-pack
The radome cover for the Ubiquiti AF60 and GBE-LR consists of a front radome and a side collar.
Thanks to the cover, the wireless connection withstands harsh weather conditions – particularly ice and snow. The heat generated by the radio prevents snow and ice from sticking to the front.
The dimensions of the cover are 420 x 180 mm, and it weighs 0.6 kg. It is made of UV-stable plastic and painted aluminum (collar).
Package includes:
- (2) Radomes
- (2) Side collars
- (2) Sets of mounting materials
Features:
- Material: Aluminum, UV-stabilized plastic
- Weight [g]: 600
- Width [mm]: 420
- Height [mm]: 420
- Depth [mm]: 180.
5. MikroTik XQ+31LC02D
6. MikroTik Pole mount QMP-LDF
QMP-LDF - quickMOUNT for the LDF Series
An advanced mast mounting adapter for MikroTik's LDF series, offering enhanced user-friendliness and versatility. There are two standard mounting options and additional QMP compatibility for wall mounting of LDF. The adapter provides extra durability through its unique composite plastic material anvilNITE™.
Dimensions: 52 x 60 x 104 mm.
Network accessories
Quantity discount
CHF7.15 per piece for 4 units
MikroTik Pole mount QMP-LDF
Wall mount
7. MikroTik CA411-711 Cover
The CA411-711 cover from MikroTik is a high-quality solution for protecting your network devices. Made from durable aluminum, this cover not only features an attractive black finish but also offers excellent longevity. It has been specifically designed for the models RB411, RB911, RB912, and RB922 to ensure an optimal fit and functionality. This cover protects your devices from external influences and helps extend their lifespan. With its thoughtful design, the CA411-711 cover is a practical addition to any network environment that values quality and protection.
- Made from durable aluminum
- Protects against external influences
- Specifically designed for MikroTik models RB411, RB911, RB912, RB922.
8. MikroTik netPower 16P L2/L3 Gigabit Ethernet (10/100/1000) White Power over Ethernet (PoE)
Main features: Management functions, switch level L2/L3. Ports and interfaces: Number of basic switching RJ-45 Ethernet ports 16, basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000), number of installed SFP modules 2. Power plug: DC connection. Network: Network standard IEEE 802.3af, IEEE 802.3at, 10G support No. Data transmission: Routing/switching capacity 72 Gbit/s, transfer rate 53.6 Mpps. Design: Rack-mountable No, stackable No, product colour White, temperature sensor Yes. Certification: CE/RED, EAC, RoHS. Performance: Built-in processor Yes, processor 98DX226S, processor clock frequency 800 MHz, RAM memory 256 MB, flash memory 16 MB. Power: Power supply included Yes, DC input voltage 18 - 57 V, power consumption (max.) 316 W. Power over Ethernet (PoE): Power over Ethernet (PoE) Yes, number of Power over Ethernet (PoE) connections 16. Operating conditions: Operating temperature range 40 - 70 °C. Weight and dimensions: Width 212 mm, depth 78 mm, height 303 mm.
Network accessories
CHF245.24
MikroTik netPower 16P L2/L3 Gigabit Ethernet (10/100/1000) White Power over Ethernet (PoE)
Power supply
9. MikroTik UP1302C-12 Power Supply & Voltage Converter Indoor Multi-colour
The MikroTik UP1302C-12 power supply and voltage converter is a reliable solution for powering CCR1036 r2 models. With an output voltage of 12 V and an output current of 10.8 A, this power supply provides a stable and efficient energy source for indoor routers. The product is specifically designed for use in network environments, ensuring optimal performance. The multicolored design of the power supply blends harmoniously into various settings, providing an appealing look. It is an essential accessory for anyone needing a reliable power supply for their MikroTik devices.
- Compatible with MikroTik CCR1036 models
- Designed for indoor use
- Stable output voltage of 12 V
- High output current of 10.8 A.
Network accessories
CHF66.90
MikroTik UP1302C-12 Power Supply & Voltage Converter Indoor Multi-colour
Power supply
10. MikroTik Accessories Sleeve30 Kit, Sleeve30
The Sleeve30 Kit for parabolic antennas of the type mANT30 significantly enhances the performance of the corresponding point-to-point links. It reduces both noise behavior and interference from neighboring RF devices by preventing side radiation from the antenna. Additionally, the Sleeve30 Kit decreases wind load and protects the antenna reflector from harsh external conditions. When used on both sides of the PtP link, it results in an increase of 22 dB on each side. The Sleeve30 shell is made of corrosion-resistant, lightweight aluminum, with an excellent RF signal transparency on the front.
Brief Info RouterBoard Sleeve30 Kit - Protective Housing for Antenna
Group Network Accessories
Manufacturer MikroTik
Manufacturer Part No. SLEEVE30
EAN/UPC 5902560366020
Main Features
Product Description RouterBoard Sleeve30 Kit - Protective Housing for Antenna
Product Type Protective Housing for Antenna
Dimensions (Width x Depth x Height) 70 cm x 22 cm x 70 cm
Weight 2.95 kg
Product Material Aluminum
Detailed Information
General
Product Type Protective Housing for Antenna
Product Material Aluminum
Width 70 cm
Depth 22 cm
Height 70 cm
Weight 2.95 kg.
Product order
See all products