Best Laserworld products in the Lighting sets category
On this page you'll find a ranking of the best Laserworld products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Laserworld EL-230RGB MK2
The Laserworld EL-230RGB MK2 is an RGB laser system with a total power of up to 230 mW.
The red laser diode with a wavelength of 650 nm, the green DPSS laser module with a wavelength of 532 nm, and the royal blue laser diode with a wavelength of 445 nm ensure bright beams and beautiful colors. The laser beams have a diameter of approximately 4 mm and a beam divergence of about 1 mrad. The projector features high-speed stepper motors with 2-5 kpps and has a scan angle of up to 30°. About 50 pre-set basic patterns, such as planes, tunnels, grids, waves, etc., can be controlled via DMX, and there is also a sound-to-light mode and a stand-alone mode available. For the sound-to-light mode, the sensitivity of the integrated and adjustable microphone can be adjusted.
On the back of this very compact device, there is an interlock connector for the safety switch as well as a key switch.
2. Laserworld FX GOBO Wheel
External add-on for the DS series, PL series, and tarm series, DMX-controlled glass effect gobo wheel with rotation, which expands a conventional laser system with additional stunning artistic effects.
- 3 stunning glass effects + open
- "Gobo" rotation and shake effect
- Easy DMX control
- Compatible with many laser models
The Laserworld FX GOBO Wheel is a DMX-controllable glass effect gobo wheel featuring three different glass effect gobos plus an open option. Each glass effect "gobo" can be rotated in two directions via DMX. The rotation speed can be adjusted. Due to its very fast responsiveness, it can also be used for gobo shake effects.
The following effects can be produced:
- Burst Grating
- Line Grating
- Lumia (Striae, light refraction)
- Open (allowing normal projection)
The Laserworld FX GOBO Wheel allows for a maximum scan angle of 55°.
The Laserworld FX GOBO Wheel can be easily placed in front of (and on) a laser system. It is compatible with most tarm and Laserworld laser systems but can also be used with other models.
Attention:
This product does not include a laser system. This product is an accessory for a laser system. The effect images were created using a tarm laser system for presentation purposes; however, the laser system is not included with this product.
3. Laserworld FX-700 Hydro
The Laserworld FX-700 Hydro is an RGB whitelight effects laser built with an IP65 waterproof rating, making it suitable for outdoor use. It projects a multitude of laser dots in different colors, including white, and offers various fade and strobe effects. Thanks to its special optics and deflection angle, this device achieves laser class 3R, meaning it requires neither a key switch nor an emergency stop and can operate in automatic mode or via DMX control, making it ideal for unattended installations.
Features include:
- RGB color mixture, including white
- Weatherproof (IP65) enclosure
- Analog color modulation
- Stand-alone operation
- DMX control
- Strobe effects
- Fade effects
- Laser class 3R
- Bracket allows for different mounting positions
- Control options: DMX, stand-alone, master/slave function.
4. Laserworld CS-3000RGB
The CS-3000RGB from Laserworld is a powerful, semi-professional analog modulated diode laser designed to create impressive laser effects. With a power output of 3,000 mW, it can produce intense beams, waves, tunnels, and simple graphics. The plug-and-play functionality allows for easy setup, while the sound-to-light and stand-alone modes offer flexible use in various environments. The laser can be controlled via DMX, enabling synchronization with other lighting systems. Additionally, the CS-3000RGB features an ILDA connection for professional computer control. Its support for master-slave mode makes it ideal for small to medium-sized nightclub installations, indoor events, and mobile DJs. The compact and lightweight housing of the projector allows for easy mounting in various positions, whether hanging or standing, making it perfect for temporary laser shows or permanent installations.
- 3,000 mW analog modulated RGB laser system
- DMX controllable with master-slave operation
- Computer control via ILDA
- Sound-to-light and stand-alone operation
- Suitable for simple graphics, texts, and logos
- 360° mounting bracket for flexible installations.
5. Laserworld CS-24.000RGB FX
The CS-24.000RGB FX from Laserworld is a powerful semi-professional diode laser that produces a variety of impressive laser effects. With its ability to display intense beams, waves, tunnels, and simple graphics, this laser is ideal for large nightclub installations, indoor events, and outdoor festivals. The combination of 22.2 W pure diode technology and three integrated grid effects – Line, Radial, and Burst – allows for the creation of stunning visual experiences that fill any space. The CS-24.000RGB FX offers versatile control options, including plug-and-play, sound-to-light, stand-alone mode, and DMX control, enabling seamless integration into existing lighting systems. Additionally, the laser features an ILDA connection for precise computer control. The front panel for masking the laser beam and the 360° mounting bracket provide extra flexibility for installation and use.
- 22.2 W pure diode RGB laser system
- Three integrated grid effects: Line, Radial, and Burst
- DMX controllable with master-slave operation
- ILDA connection for computer control
- Full color with analog modulation
- Plug & Play: Sound-to-Light and stand-alone operation.
6. Laserworld CS-6000RGB
The CS-6000RGB from Laserworld is a powerful, semi-professional diode laser designed to create impressive laser effects. With a power output of 6,000 mW, this laser offers a variety of effects, including beams, waves, and tunnels, as well as the ability to display simple graphics. The plug-and-play functionality allows for easy use, while the sound-to-light and stand-alone modes provide flexible adaptation to different event formats. The laser can be controlled via DMX, enabling synchronization with other lighting systems. Additionally, the CS-6000RGB supports master-slave mode, making it ideal for small to medium-sized nightclub installations, indoor events, and mobile DJs. The compact and lightweight housing of the laser is equipped with a sturdy bracket that offers various mounting options, both hanging and standing, making it a versatile choice for temporary and permanent installations.
- 6,000 mW pure diode RGB laser system
- DMX controllable with master-slave operation
- Full diode projector without DPSS technology
- Computer controllable via ILDA
- Capable of simple graphics with 30kpps @ 8° scanner
- 360° mounting bracket for flexible installations.
7. Laserworld EL-900RGB
The Laserworld EL-900RGB is a complete laser show system in one device. It has been specifically designed for the needs of DJs and smaller clubs looking for a single laser system that can cover the entire space—without the drawback of narrow beam angles from deflection units. The EL-900RGB is an RGB show laser with a total output of up to 900 mW and fast stepper motors operating at 3-8 kpps. It features four beam outputs, each equipped with its own pair of stepper motors. Many of the integrated patterns have been programmed to ensure that the four beam outputs work harmoniously together, filling the entire space—similar to a laser show with multiple devices. The curved design of the device allows for an exceptionally wide horizontal beam angle.
The Laserworld EL-900RGB can be operated in music-synchronized, automatic, or DMX mode. It can display many different colors, including white. The red laser source with a wavelength of 650 nm, the green one with a wavelength of 532 nm, and the blue one with 450 nm enable the production of beautiful colors and bright, well-visible beams. The beam has a diameter of approximately 3 mm at the exit and a divergence of about 2 mrad. About 50 patterns, such as layers, tunnels, grids, waves, etc., are already pre-stored. Many of them are not output equally across all four beam outputs but are partially mirrored along the X-axis or otherwise coordinated, creating a homogeneous overall image that resembles a laser show from multiple devices. The sensitivity of the microphone for music-synchronized operation can be adjusted.
Class 3B show laser with 900 mW output in red, green, and blue
- Pre-stored laser show patterns
- Multicolor system + white
- Specifically designed for DJs and small clubs
- With bright 450 nm royal blue
- Controllable via DMX; stand-alone; master/slave function; music control via microphone.
8. Laserworld EL-300RGB
Multicolored, stunning white light star effect laser. Plug & play capable and DMX controllable. This compact laser system is suitable for safe audience projection (Laser Class 2). Hundreds of laser points illuminate the event and create a starry sky in the room. Ideal for private parties, small bars, and mobile DJ events.
The Laserworld EL-300RGB is an RGB white light effect laser with adjustable color change, rotation, and strobe. Thanks to its special optics, the Laserworld EL-300RGB is classified as Laser Class 2, yet it still provides well-visible laser beams due to evenly distributed power. This means that this show laser is significantly safer to use than comparable laser systems in a higher laser class.
The many fine and bright colored laser beams shine like a real starry sky when projected onto a wall or other surface, making them the highlight of any party. The colors, as well as their brightness, rotation speed, and strobe effect can be manually adjusted via a push button on the housing or via DMX. A music mode and an automatic mode are also available. In music mode, the sensitivity of the built-in microphone can be adjusted. The red diode module with a wavelength of 638 nm, the green diode module with a wavelength of 520 nm, and the blue diode module with a wavelength of 450 nm ensure beautiful colors and clear, bright laser beams. This effect laser from the Laserworld Ecoline series features additional safety features such as a key switch, an interlock connection, and a power switch on the back of the device. The Laserworld EL-300RGB show laser is perfectly suited for mobile DJs, as well as bars and small nightclubs.
9. Laserworld DS-3000RGB MK5
The DS-3000RGB MK5 from Laserworld is a powerful, semi-professional color laser that is ideal for medium to large installations in nightclubs, indoor events, and large productions. With an integrated multi-control mainboard, this laser offers impressive DMX control, allowing multiple devices to be seamlessly managed alongside other DMX lighting systems. The included fully functional laser show software license enables easy programming and customization of laser shows. The sealed optics area ensures low maintenance, while the pure diode laser sources provide excellent beam characteristics and beautiful analog color modulation. The DS-3000RGB MK5 is therefore an excellent choice for anyone seeking a high-quality laser solution.
- 3,000 mW guaranteed power
- Capable of graphics with 40 kpps@8°
- Maximum scan angle of 40°
- Extremely sharp, intense beams with approximately 4 mm beam diameter
- Integrated network DAC for show controller and show editor
- Versatile control modes: Auto, DMX, Artnet, and ILDA.
10. Laserworld EL-400RGB S
Multicolored and bright white laser with easy plug & play setup and DMX control, creating beam, wave, and tunnel effects in the air. Perfect for enhancing home parties, small bars, and mobile DJ events with fun colors.
- Typical power 400 mW
- 7 colors including white
- Beam, wave, and tunnel laser effects
- Sound-to-light mode
- DMX programmable
- 15kpps @ 8° scanner
The Laserworld EL-400RGB S is an RGB show laser system featuring a 15kpps @ 8° scanner and a total output power of up to 400 mW.
The red diode laser module with a wavelength of 650 nm, the green DPSS laser module with a wavelength of 532 nm, and the royal blue laser module with a wavelength of 445 nm provide beautiful colors and bright beams. These beams have a diameter of approximately 3 mm and a beam divergence of 2 mrad. 15kpps @ 8° is available to create various patterns. The effects can be controlled via DMX. A sound-to-light mode and a stand-alone mode are also available. For the sound-to-light mode, the sensitivity of the built-in microphone can be adjusted.
On the back of the very compact device, there is an interlock connection for an emergency stop switch as well as a key switch.
The Laserworld EL-400RGB S is an innovative solution for beginners and hobby users, as well as for mobile DJs, and is frequently used in bars, small to medium-sized clubs, at private parties, or for home use.
