Best Phobya products in the Internal cables (PC) category
On this page you'll find a ranking of the best Phobya products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Phobya 4Pin PWM extension
An extension of a PWM connector (4Pin). Since controlling and switching via the mainboard of PWM fans is much easier than via a fan controller, this cable is a good choice. The extension cable is supplied in a plain black. The cables are shielded with a suitable sheathing of Flexsleeves. It offers additional protection against abrasion. This considerably increases the service life of the cables. The ends to the connections were provided with shrink tubing, so that a clean transition is created.
2. Phobya Y-cable 4Pin PWM
A Y-cable from a 4Pin PWM connector to 3x 4Pin PWM.Since the control and switching via the PWM mainboard of a PWM fan is much cheaper than using a fan controller, this cable is ideal.
This cable can be used to increase the small number of motherboard slots for these types of fans.The adapter is supplied in a plain black. The cables are shielded with a suitable sheathing made of Flexsleeves. It offers additional protection against abrasion. This increases the service life of the cables considerably.
The ends towards the connections were fitted with shrink tubing to create a clean transition.
A white sticker on the cable indicates that the speedometer signal is transmitting.
Sleeving:This cable is not only practical but also visually very attractive. The net that wraps around the actual cables is very dense and offers exactly the effect that the professionals want: Complete modification of the cables to emphasize the uniqueness of his system even better!
Special attention was paid to the combination of the cable sheathing (sleeve), the connector and the shrink tubing to create a uniform image.
Sets:Phobya's goal is to meet the hobby and professional casemodders here.
Sleeving is a lot of work and takes a lot of time, so you can now rebuild your complete system with the Phobya cables as you like, just by changing the cables.
Technical details:
Connections:
1x 4Pin PWM male connector
3x 4Pin PWM female connector
Colour: black sleeves, black plugs, black heat shrink tubing
Dimensions: complete 30cm
RoHS compliant scope of supply:
1x Phobya Y-cable 4Pin PWM to 3x 4Pin PWM 30cm - Black
3. Phobya Molex extension
The encompassing mesh that wraps around the actual cables is very dense and provides exactly the effect that professional modders desire: a complete transformation of the cables to better emphasize the uniqueness of the system. Special attention has been paid to the combination of the cable sleeve, the connector, and the heat shrink tubing, ensuring they create a cohesive look. Phobya's goal is to cater to both hobbyist and professional case modders. Sleeving is a lot of work and takes a lot of time, which is why with Phobya's cables, you can completely customize your system just by simply swapping out the cables.
4. Phobya ZK 12VHPWR Adapter 180 degrees 16Pin to 4x8Pin - Black Left
Phobya 12VHPWR Adapter 180 Degree 16Pin to 4x8Pin - Black Left
With the continuous development of graphics cards and the ever-increasing demand for more power and performance, traditional power supplies often reach their limits. This is where the ATX3.0 adapter comes into play. It is designed to tackle the challenges of modern hardware and ensure optimal power delivery for demanding systems.
The Phobya 12VHPWR 180-degree angle adapter is specifically designed for the 16-pin 12VHPWR connector of graphics cards. The 180-degree angle adapter allows for a secure and efficient connection of the power cable at a 180-degree angle. This prevents the contacts from bending or breaking, ensuring a safe connection. As a result, thermal overloads through the remaining connections are eliminated.
Included: Phobya 12VHPWR Adapter 180 Degree 16Pin to 4x8Pin - Black Left
If the backplate of your graphics card protrudes more than 3mm, the Phobya angle adapter is not compatible!.
5. Phobya 4Pin Molex current extension
Extension cable for connecting 4-pin Molex fans (CPU coolers, case fans, etc.) to a power supply connection or another fan connection (3-pin Molex), approximately 62 cm long.
Sleeving:
This cable is not only functional but also visually appealing. The surrounding mesh that wraps around the actual wires is very dense and achieves the desired effect: a complete makeover of the cables to highlight the uniqueness of your system. Special attention has been paid to the combination of the cable sleeve, the connector, and the heat shrink tubing, ensuring they create a cohesive look.
Sets:
Phobya aims to cater to both hobbyist and professional case modders. Sleeving is a labor-intensive process that takes a lot of time, so with Phobya's cables, you can easily customize your entire system just by swapping out cables.
Technical Details:
Connections: 4-Pin Molex
Color: black sleeve, black connector, black heat shrink tubing
Dimensions: 60 cm
Delivery includes:
1x Phobya 4-Pin Molex power extension 60 cm - Black.
Internal cables (PC)
Quantity discount
CHF6.80 per piece for 3 units
Phobya 4Pin Molex current extension
6. Phobya SATA Power Extension
S-ATA hard drive cables for modern S-ATA hard drives feature a sleeved design. Technically, the cable meets all requirements and, with this appearance, becomes "one" with the entire system. This cable is not only practical but also visually appealing. The surrounding mesh that wraps around the actual cables is very dense and provides exactly the effect that professional sleevers desire: a complete transformation of the cables to better emphasize the uniqueness of the system. Special attention has been paid to the combination of the cable sleeve, the connector, and the heat shrink tubing, ensuring a cohesive look. Phobya aims to cater to both hobbyist and professional case modders. Sleeving is a lot of work and takes a considerable amount of time, which is why with Phobya's cables, you can easily transform your entire system just by swapping out the cables.
7. Phobya PWM Adapter for VGA
Regulates the speed of 4-pin PWM fans through the PWM signal from the graphics card. With the help of the adapter, users can connect multiple PWM fans to a single PWM cable. It is suitable for AMD and Nvidia reference cards with a 4-pin PWM fan connector.
8. Phobya Y-cable 4Pin PWM to 4x 4Pin PWM
A Y-cable from a 4Pin PWM to 4 x 4Pin PWM ports. It is more cost-effective to control and switch the fan via the motherboard. This extension is black. The cables are shielded with a flexible coating that protects against abrasion, increasing their lifespan.
9. Phobya SATA power Y-cable internal to 3Pin 5V and 12V - black 20cm
This Y-cable evenly distributes the power from a SATA connector to 3-pin 5V and 12V connectors. With this, you'll never run out of connections in your system again! Sleeving: This cable is not only functional but also visually appealing. The surrounding mesh that wraps around the actual cables is very dense and provides exactly the effect that professional sleevers desire: a complete overhaul of the cables to further emphasize the uniqueness of your system! Special attention has been given to the combination of the cable sleeving (the sleeve), the connector, and the heat shrink tubing, ensuring a cohesive look. Sets: Phobya aims to cater to both hobbyist and professional case modders. Sleeving is a lot of work and takes a lot of time, which is why with Phobya's cables, you can easily transform your entire system just by swapping out cables. Technical details: Connections: SATA power connector, 3-pin 5V and 12V. Color: black sleeve, black connector, black heat shrink tubing. Dimensions: 20 cm per strand. RoHS compliant. Delivery includes: Phobya SATA power Y-cable internal to 3-pin 5V and 12V 20 cm - Black.
Internal cables (PC)
Quantity discount
CHF3.95 per piece for 4 units
Phobya SATA power Y-cable internal to 3Pin 5V and 12V - black 20cm
10. Phobya ZK 12VHPWR Adapter 180 degrees 16Pin to 4x8Pin - Black Right
Phobya 12VHPWR Adapter 180 Degree 16Pin to 4x8Pin - Black Right
With the continuous development of graphics cards and the constant demand for more power and performance, traditional power supplies often reach their limits. This is where the ATX3.0 adapter comes into play. It is designed to meet the challenges of modern hardware and ensure optimal power delivery for demanding systems.
The Phobya 12VHPWR 180-degree angle adapter is specifically designed for the 16-pin 12-VHPWR connector of graphics cards. The 180-degree angle adapter allows for a secure and efficient connection of the power cable at a 180-degree angle. This prevents the contacts from bending or breaking, ensuring a safe connection. As a result, thermal overloads through the remaining connections are eliminated.
Package includes: Phobya 12VHPWR Adapter 180 Degree 16Pin to 4x8Pin - Black Right
If the backplate of your graphics card protrudes more than 3mm, the Phobya angle adapter is not compatible.