Best selling Heat shrink tubings from 3M
This page always stays fresh and updates automatically.
1. 3M Heat shrinkable tubing
3M Germany Heat Shrink Tubing Thin-Walled 50.8/25.4 mm, Black.
Manufacturer: 3M Germany
Name: Thin-Walled Heat Shrink Tubing 50.8/25.4 mm, Black
Type: GTI 50.8/25.4 sw
Design: Thin-Walled
Shrink Ratio: 2:1
Inner Diameter Before Shrinking: 51 mm
Inner Diameter After Shrinking: 25.4 mm
Wall Thickness After Shrinking: 1.1 mm
Length: 1 m
Operating Temperature: 135 °C
Color: Black
Material: Polyolefins (PO-X)
Halogen-Free: No
With Inner Adhesive: No
UL Approval: No
The 3M GTI heat shrink tubing is a thin-walled heat shrink tubing made from modified, radiation-curable polyolefin. It features excellent electrical, physical, and chemical properties and is suitable for a wide range of applications, particularly for electrical insulation and marking of connections. The heat shrink tubing is highly resistant to aging and remains very flexible over the long term. Its shrink ratio is two to one. It is RoHS compliant and can be used in a temperature range of -55 °C to +135 °C. All variants except for the transparent one are self-extinguishing.
2. 3M Cold-shrink tubing Silik 6.0-25.0 mm L125mm 84
The cold shrink insulation sleeve made of EPDM rubber consists of factory-prestretched tubes that contain a removable support spiral. Simply prepare the connection, position the tube, and pull out the support spiral. The cold shrink sleeves are tubular sleeves with open ends that feature a sealing mastic. Once the insulation tube is positioned over a connector, the support spiral can be pulled out from one end. This causes the ends of the tube to shrink, creating a waterproof seal. The size ranges of the core and tube, along with the sealing mastic at each end, ensure a wider range of applications without compromising the sealing and insulation provided by the EPDM rubber. The active deformation of the specially formulated material guarantees a permanent seal and insulation against the environment.
3. 3M TE100042031 Heat shrink tubing (TE100042031)
3M Germany Heat Shrink Tubing Roll HSR 3000 1.5/0.5 mm, black.
Manufacturer: 3M Germany
Description: Heat shrink tubing roll 1.5/0.5 mm, black, thin-walled
Type: HSR 3000 1.5/0.5 black
Design: thin-walled
Shrink ratio: 3:1
Inner diameter before shrinking: 1.5 mm
Inner diameter after shrinking: 0.5 mm
Wall thickness after shrinking: 0.45 mm
Length: 12 m
Operating temperature: 135 °C
Color: black
Transparent: no
Material: Polyolefins (PO-X)
Halogen-free: yes
With internal adhesive: no
UL approval: no
3M heat shrink tubing HSR-3000 is color-coded for quick and easy identification of wires. This split-resistant, halogen-free tubing is used as a shrinkable electrical insulation over cable splices or terminations. The tubing has a shrink ratio of 3:1, is mechanically tough, easily marked, and resistant to cold flow. It is ideal as a lightweight protective cover for cable harnesses, for marking and bundling wires, and for packaging components. It is temperature resistant from -55 to 135 °C and complies with RoHS 2011/65/EU.
4. 3M Cold-shrink insulating sleeve, 49.m, black, EPDM rubber
The cold shrink insulation tubes 8420 and 8430 are EPDM tubes that feature a unique cold shrink connection system. The products are delivered pre-stretched on a removable support spiral, allowing for efficient and easy installation. When the support spiral is pulled out after positioning the tube, the tube shrinks and forms a waterproof seal. The active deformation of the specially formulated material ensures a permanent seal and insulation against the environment. Cold shrink insulation tubes of series 8420 and 8430 are particularly useful for electrical insulation in all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for both indoor and outdoor use. They often provide good physical protection and shielding against environmental influences for communication lines and other non-electrical applications, including cable sheath repairs. The temperature range is from -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+ vinyl electrical tape or self-vulcanizing silicone rubber tape 70.
5. 3M Heat shrink tubing roll 24/8 mm blue duennw. HS
Heat shrink tubing HSR-3000 is a series of flexible, thin-walled RoHS-compliant shrink tubes made from cross-linked halogen-free polyolefin. HSR 3000 offers good insulation protection for various industrial applications. They are also suitable for cable marking and identification applications. HSR 3000 tubes have a shrink ratio of 3:1 and are available in the following colors: transparent, black, red, yellow, blue, white, green, gray, and green-yellow striped. HSR-3000 heat shrink tubes are color-coded for quick and easy identification of wires. This split-resistant, halogen-free tubing is used as shrinkable electrical insulation over cable splices or terminations. The tubes, with a 3:1 expansion ratio, are mechanically tough, easily markable, and resistant to cold flow. They are ideal as a lightweight protective cover for cable harnesses, for marking and bundling wires, and for packaging components. They are temperature resistant from -55 to 135 °C and comply with RoHS 2011/65/EU.
6. 3M TE100037601 Heat shrink tubing (TE100037601)
3M Deutschland Heat Shrink Tubing MDT-A 38/12-B
Manufacturer: 3M Deutschland
Description: Heat shrink tubing 38/12 mm, black, with adhesive
Type: MDT-A 38/12-B
Design: medium wall
Shrink ratio: 3:1
Inner diameter before shrink: 38 mm
Inner diameter after shrink: 12 mm
Wall thickness after shrink: 3.3 mm
Length: 1 m
Operating temperature: 130 °C
Color: black
Transparent: no
Material: Polyolefins (PO-X)
Halogen-free: yes
With internal adhesive: yes
Printable: no
UL approval: no
MDT-A heat shrink tubes are a medium-walled shrink tubing series with hot melt adhesive, designed for reliable performance in electrical splicing, connections, and terminations up to 1.0 kV, as well as for mechanical and environmental protection. MDT-A shrink tubes feature a halogen-free, cross-linked polyolefin outer wall and a factory-applied adhesive layer on the inside.
The MDT-A heat shrink tubing is a halogen-free, medium-walled heat shrink tube made from cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all unevenness and cavities, preventing moisture ingress.
The MDT-A heat shrink tubing is suitable for insulating plastic and mass cables up to 0.6/1 kV for both outdoor and underground installation. The aging-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. It can be used in a temperature range of -55 °C to +130 °C.
With its high shrink ratio of 4.5 to 1, you can accommodate large diameter jumps with just one tube. The MDT-A heat shrink tubing meets technical requirements according to IEC 60684 and is approved by Lloyds Register of Shipping, Certificate 95/30032(E5). It is halogen-free and RoHS compliant.
EAN: 8712403518908.
7. 3M Heat-shrinkable connector 3x1.5-4x6qmmPr.verb. 9 (TE100053848)
The 3M 91-AH is a heat-shrink connection kit for crimp connectors designed for low voltages. It is suitable for 4 or 5-core, unshielded, and non-armored insulated low-voltage plastic cables with ratings up to 0.6/1 kV. The shrink ratio is up to 4.5:1, the minimum shrink temperature is 135 °C, and the operating temperature range is from -55 °C to 130 °C. The 91-AH 20-5N is RoHS compliant, halogen-free, and provides excellent waterproof moisture sealing as well as protection against mechanical impacts. It features outstanding electrical insulation and good resistance to UV radiation, alkaline earth metals, and chemicals. Applications include electrical insulation and mechanical protection of crimp connectors. The 91-AH is suitable for use indoors and outdoors in underground and underwater installations. The 91-AH is available in black and in sizes designed for cable cross-sections ranging from 5 x 1.5 to 5 x 6 mm². Standard packaging is as a kit. Approvals: Type tested according to DIN EN 50393, Table 3.
8. 3M HEATSHRINK 2,4MM
Hose diameter: 2.4 mm
Shrink diameter: 1.2 mm
Color: Black
Sleeve type: Heat shrinkable
Shrink ratio: 2:1
Tube length: 11 m
Material: Polyolefin
Flame retardant: Yes
Series: HSR
Heat shrinkable tubing in dispenser box. Thin wall heat shrink tubing for insulation. Flexible after assembly as no hot melt adhesive is present.
9. 3M TE100050992. Product colour: Black, Quantity per pack: 4 piece(s), Shrink temperature: 135 °C (TE100
3M Germany Heat Shrink Joint Kit 91-AH 23 N
Manufacturer: 3M Germany
Description: Heat Shrink Joint Kit 4x25-95 mm² L700
Type: 91-AH 23 N
Rated Voltage U0/U (Um): 0.6/1 (1.2) kV
Design: Heat Shrink
For connecting paper-insulated to plastic-insulated cables: no
Number of conductors: 4
Conductor nominal cross-section: 25..95 mm²
Mining approval: no
With concentric shielding: no
Suitable for: others
Halogen-free: yes
Further details:
The 3M 91-AH is a heat shrink joint kit designed for crimp connectors, intended for low voltage applications. It is suitable for 4- or 5-core, unshielded and non-armored insulated low voltage plastic cables with up to 0.6/1 kV (according to HD 603 and IEC 60502-1). It features a shrink ratio of up to 4.5:1, a minimum shrink temperature of 135 °C, and an operating temperature range of -55 °C to 130 °C. The 91-AH 20-5N is RoHS compliant, halogen-free, and provides excellent waterproof moisture sealing as well as protection against mechanical impacts. It offers outstanding electrical insulation and good resistance to UV radiation, alkaline earth metals, and chemicals. Applications include electrical insulation and mechanical protection of crimp connectors. The 91-AH is suitable for use indoors and outdoors in underground and underwater installations. The 91-AH is available in black and in sizes designed for a cable cross-section range of 5 x 1.5 to 5 x 6 mm². Standard packaging as a kit. Approvals: Type tested according to DIN EN 50393, Table 3.
Heat shrink tubing
CHF60.95
3M TE100050992. Product colour: Black, Quantity per pack: 4 piece(s), Shrink temperature: 135 °C (TE100
4x
10. 3M Cable Abandonment Kit Black, RubberNo81 mm
The Cable Abandonment Kit in black from 3M is a high-quality heat shrink tubing specifically designed for reliable insulation and protection of cables. With a maximum operating temperature of 90 °C and a minimum operating temperature of -40 °C, this product is suitable for a variety of applications, even under extreme conditions. The tubing has a length of 296 millimeters and is made from durable rubber, providing it with high flexibility and longevity. The black color ensures discreet integration into various environments. This kit is ideal for use in electrical installations to safely insulate cable connections and protect them from environmental influences.
Product order
See all products