Best selling Cables + Plugs from Wago
On this page you’ll find a ranking of the best Cables + Plugs from Wago. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Wago Plug. w. Strain relief g.
Plug with strain relief housing, 2-pole, Code E, green. WINSTA® KNX pin strip with protection class IP20. Efficient connection options plug in instead of complicated screwing: with the 2-pole WINSTA® KNX pin strip. WAGO installation connectors are used when the requirements for electrical installations are repetitive or categorized in a specific pattern, for example, when installing grid or recessed lights. For added protection in electrical installations, the installation connector is equipped with a mechanical misplugging protection. According to protection class IP20, the installation connector ensures protection against contact with live components (only in plugged condition with strain relief housing). These installation connectors are not intended for use in easily accessible areas. The standardized KNX interface stands for a uniform and manufacturer-independent communication protocol for the intelligent networking of modern home and building system technology. In green, they are used for signal transmission in KNX networks. WINSTA® KNX solutions for your electrical installations – misplugging protected and maintenance-free. The WINSTA® connector system is perfectly tailored to the high demands of building installation. It makes electrical installations pluggable and thus more efficient, safer, and error-free. Thanks to the pre-assembled system solution, assembly times and installation errors on the construction site are significantly reduced. Now reduce your installation costs without compromising on quality and safety: With protection class IP20, you lower service efforts and avoid unnecessary downtimes. Time savings, as no wiring is necessary on-site for the auxiliary power supply of I/O devices. Flexible and space-saving installation, comfortable setup, and commissioning.
2. Wago Terminal strip
WAGO GmbH & Co. KG terminal strip 234-512
Manufacturer: WAGO GmbH & Co. KG
Designation: Terminal strip 12-pole
Type: 234-512
Height: 14 mm
Number of electrical connections: 12
Number of tiers: 1
Pin spacing: 2.54 mm
Angle PCB/conductor connection: 90° (vertical up)
Rated current In: 6 A
Rated voltage: 160 V
Rated impulse voltage: 2.5 kV
Overvoltage category: III
Degree of pollution: 2
Type of conductor connection: Spring-cage connection
Connectable conductor cross-section solid: 0.08 to 0.5 mm²
Connectable conductor cross-section flexible with ferrule: 0.25 mm²
Connectable conductor cross-section flexible without ferrule: 0.08 to 0.5 mm²
Connectable conductor cross-section stranded: 0.08 to 0.5 mm²
Type of connection PCB: Solder connection
Material of connection surface: Tin
Length of pin: 4 mm
Material of insulating body: Thermoplastic
Housing colour: Orange
Flammability class of insulating material according to UL 94: V0
Operating temperature: -60 to 105 °C
Type of PCB mounting: Terminal contact
Mounting type: Soldering
Type of banding: Without
WAGO GmbH & Co. KG terminal block 234-512: further details PCB terminal push-button 0.5 mm² grid spacing 2.54 mm 12-pole CAGE CLAMP® 0.50 mm² orange.
3. Wago 713-1110
The Wago 713-1110 terminal block is a high-quality connector designed for a wide range of applications in electronics. With a maximum operating temperature of 100 °C and a minimum operating temperature of -60 °C, this product is suitable for use in extreme environments. The terminal block features 20 positions and is designed with a compact pitch of 3.5 mm, allowing for flexible integration into various systems. The use of glass-fiber reinforced polyamide as the housing material ensures high mechanical stability and durability. The connection type via cage clamp terminals guarantees a secure and reliable connection. Additionally, the terminal block is 100% mis-insertion proof and can be coded by cutting off the coding lugs, making it easier to adapt to specific requirements.
- Operating temperature from -60 °C to 100 °C
- Rated voltage of 250 V and rated current of 10 A
- 100% mis-insertion proof for increased safety
- Coded by cutting off the coding lugs
- Housing material made of glass-fiber reinforced polyamide.
4. Wago Female multipoint connector light grey 734-120/000-047 Content: 25 pcs (734-120/000-047)
The spring terminal block Light Gray 734-120/000-047 is a versatile connection element designed for various applications in electronics and electrical engineering. With a compact design and a robust construction made of PA 66, this terminal block provides a reliable connection for a wide range of hardware components. The terminal block is equipped with 20 conductors, allowing for simple and efficient wiring. It is ideal for use in different environments and can operate at temperatures up to 28 degrees Celsius. The gray color ensures unobtrusive integration into existing systems. This terminal block is a practical solution for anyone seeking a reliable and durable connection.
- Compatible with various hardware components
- Robust construction made of PA 66
- Socket design with straight connector configuration
- Suitable for applications at temperatures up to 28 °C.
Cables + Plugs
CHF339.95
Wago Female multipoint connector light grey 734-120/000-047 Content: 25 pcs (734-120/000-047)
5. Wago Plug socket, handle, straight, 5mm pitch, 4 poles
The Wago connector socket is a reliable connection solution for electronic applications. With a 5 mm pitch and a straight orientation, it offers easy installation and handling. This socket is suitable for a variety of wire diameters, ranging from 0.2 mm² to 2.5 mm², and supports a rated voltage of up to 250 V as well as a rated current of 16 A. The operating temperature ranges from -60 °C to 100 °C, making it suitable for use in different environments. The socket is UL listed and meets the flammability class UL 94 V-0, ensuring additional safety. It is ideal for applications that require a robust and durable connection.
- Operating temperature of -60 °C to 100 °C
- Suitable for wire diameters from 0.2 mm² to 2.5 mm²
- Rated voltage of 250 V and rated current of 16 A
- UL listed and meets flammability class UL 94 V-0
- Easy plug-in installation with a 5 mm pitch.
6. Wago 218-106
The Wago 218-106 wire-to-board terminal block is a high-performance connection solution designed for a variety of applications in electronics. This terminal provides a reliable connection between wires and circuit boards and is suitable for use in demanding environments. With a wide operating temperature range of -60 °C to 105 °C, it is ideal for various industrial applications. The terminal supports wire diameters from 28 AWG to 20 AWG and allows for a rated voltage of up to 160 V as well as a rated current of 6 A. The through-hole mounting ensures easy installation on circuit boards, while the cage clamp guarantees a secure and stable connection. The terminal also meets important safety standards, making it a trustworthy choice for professional applications.
- Operating temperature range of -60 °C to 105 °C
- Supports wire diameters from 28 AWG to 20 AWG
- Rated voltage of up to 160 V and rated current of 6 A
- Through-hole mounting for easy installation on circuit boards
- Meets safety standards such as UL 94 V-0 and CCA CSA KEMA-KEUR.
7. Wago 2734-108/107-000
The WAGO plug housing cable 2734-108/107-000 is a high-quality solution for connecting electrical components. With a total pin count of 8 and a pitch of 3.50 mm, this cable provides a reliable and stable connection. It is equipped with a mounting flange that allows for easy installation and features an actuator button that facilitates handling. The cable's coding capability ensures that it can be used flexibly in various applications. Made from durable polyphthalamide (PPA GF) and a copper alloy, the cable is suitable for temperatures up to 100 degrees Celsius. With a width of 37.5 mm, a height of 20.4 mm, and a length of 13.5 mm, it is compact and fits into various installations. This product is offered in a sales unit of 50 pieces, making it a practical choice for high-demand projects.
- Mounting flange for easy installation
- Codeable for flexible applications
- Maximum temperature of 100 °C
- High-quality material made from polyphthalamide.
8. Wago 231-109/008-000
With locking foot, 9-pole, pitch 5 mm, codable, with 2 locking latches, sheet thickness 0.6 x 1.2 mm, mounting holes Ø 3.5 mm, with mounting adapter 209-137 also on TS 35, with coding nose, with locking nose, gray. Special feature: with locking noses.
9. Wago 734-102/037-000
WAGO GmbH & Co. KG female connector 734-102/037-000
Manufacturer: WAGO GmbH & Co. KG
Designation: Female connector 2-pin, 3.5mm
Type: 734-102/037-000
Connection type: PCB to cable
Contact design: Socket
Number of poles: 2
Number of rows of plug-in contacts: 1
Contact pitch: 3.5 mm
Terminal pitch: 3.5 mm
Angle contact/conductor connection: 180° (horizontal)
Rated current: 10 A
Rated voltage: 160 V
Rated impulse voltage: 2.5 kV
Overvoltage category: III
Pollution degree: 2
Connectable conductor cross-section, fine-stranded without ferrule: 0.08 to 1.5 mm²
Connectable fine-stranded conductor cross-section with ferrule: 0.25 to 1.5 mm²
Connectable solid conductor cross-section: 0.08 to 1.5 mm²
Connectable stranded conductor cross-section: 0.08 to 1.5 mm²
Electrical connection type: spring-loaded connection
Connectable cable type: round cable
Material of contact coating: tin
Material of contact: other copper alloys
Material of insulating body: thermoplastic
Material of housing: plastic
Coating of housing: uncoated
Housing colour: grey
Flammability class of insulating material according to UL 94: V0
With protective conductor: no
Operating temperature: -60 to 100 °C
Protection class (IP), mounted: IP20
WAGO GmbH & Co. KG female connector 734-102/037-000: further details
1-conductor female connector CAGE CLAMP® 1.5 mm²
Spacing: 3.5 mm
2-pole
100% mismating protected
Lateral locking latches
1.50 mm²
Light grey
EAN: 4044918494373.
10. Wago Pin header (standard)
The WAGO pin header (standard) is a high-quality connection solution designed for a wide range of electronic applications. With a pin count of 4 and a pitch of 3.5 mm, it provides a reliable and mis-insertion protected connection. The pin header is made of robust polyamide, ensuring high temperature resistance, with an operating range of -60 °C to 100 °C. These features make it ideal for use in demanding environments. The pin header is equipped with a spring clamp that allows for easy and secure installation. It is compatible with various hardware solutions and suitable for a variety of applications in electronics.
- Operating temperature from -60 °C to 100 °C
- Wire diameter from 0.08 mm² to 1.5 mm²
- Rated voltage of 160 V and rated current of 10 A
- 100% mis-insertion protected for increased safety
- UL 94 V-0 flammability rating for improved fire safety.
Product order
See all products