
Philio PHI PST02-1C - 3-in-1 Sensor (Door/Window, Temperature, Brightness)
This page always stays fresh and updates automatically.
3-in-1 Sensor (Door/Window, Temperature, Brightness)
With the 3-in-1 Sensor PST02-1C from Philio, you can monitor not only the status of your doors and windows, as the device is equipped with a total of three different sensors:
- Door/Window Sensor
- Temperature Sensor
- Brightness Sensor
The sensor consists of two parts: a main unit with the sensor and a magnet. The magnet is attached to the movable part, and the detector is mounted on the frame of the door or window. When the door or window opens, the magnetic field shifts, and the detector triggers an alarm state as long as the system is armed.
The sensor can also be used for light control, for example, by determining the light intensity with the light sensor, which can then be relayed to a Z-Wave switch. The switch will turn on the light whenever the door is opened and the room behind it is dark. Each time the door/window sensor is triggered, the sensor also sends temperature and brightness values.
Features:
- Contact sensor to monitor the status (open/closed) of doors and windows
- Additionally measures and reports values for temperature and brightness
- Tamper protection
- Can be mounted on any flat surface in horizontal or vertical position
- Firmware update Over The Air (OTA)
- Power supply: Battery (1x CR123A)
- Wireless technology: Z-Wave Plus
- Dimensions: 28 x 95 x 35 mm
- Product dimensions (WxHxD): 28 x 95 x 35 mm
- Packaging dimensions (WxHxD): 67 x 131 x 26 mm
- Product weight (net): 0.047 kg
- Product weight (gross): 0.081 kg
- WEEE
- CE.

Philio PHI PST02-1C - 3-in-1 Sensor (Door/Window, Temperature, Brightness)
The Philio Z-Wave Outdoor Siren (PSE04) is a battery-operated, wireless outdoor siren that produces a loud signal tone of 100 decibels and features a strobe light to alert you to potential intruders, emergencies, and security incidents. The PSE04 outdoor siren is a simple, small, and elegant Z-Wave siren with six different tones that can be used as a doorbell or burglary alarm. Thanks to the mounting bracket on the back, you can hang the siren anywhere.

The Philio Tech Z-Wave Multisensor consists of a door/window sensor, a motion sensor, a light sensor, and a temperature sensor. It is very easy to install and consists of a detector and a magnet. It operates using the Z-Wave protocol to enable secure two-way wireless communication. A 400/500 series chip is built in, which supports multichannel actions. The 1500mA CR123A lithium battery has a lifespan of over two years.
