CHF13.90 CHF4.64/1m
Digitec Ethernet Patch Cable RJ45
S/FTP, CAT6a, 3 m
Product rating for Digitec Ethernet Patch Cable RJ45
Scrap
The cables are jammed !
I ordered 3 cables, 2 could be removed with a screwdriver. The other is the Lan port broken out. Quite great.
Let the fingers of this cheap junk!
Contra
- Can not be removed! Have so destroyed my Lan Port
I had exactly the same problem. It's better to order other cables and not risk a defective port.
I have never had this problem until now. I have about 5 pieces in use at different lengths. can't quite understand your problem. Greetings
Okay, then it probably doesn't affect all cables. However, it was definitely the case for me.
The problem with Ethernet cables, especially RJ45 from Wifi 6 and CAT6a, is the thickness of the cable including the plug and the disconnection of the plug. You have to press really hard "in the right place" until the plug comes out of the RJ45 socket.
I had this or this problem with all the cables I tested with 10Gbits that are shielded, i.e. CAT 6a "shielded".
If you are looking for a simpler unshielded cable, then take the one from Swisscom. You can also buy it here. However, bear in mind that this "could" cause other problems. B.s.p Swisscom patch cable RJ-45 - RJ-45, Cat 6A, UTP, 2 m, white
UTP, CAT6a, 2 m . Item number: 53474248
GreetingsI tried for a very long time to remove the cable correctly. That did not work. I have many shielded Cat 6 cables and all other cables work perfectly...
Had the same problem with every cable I have tried. I agree. It's junk.
Absolute cheek on the part of digitec. We should get compensation!
Same for me, unfortunately it's stuck in a rather expensive piece of hardware
I have exactly the same problem. The clip of the latching lug bends when pressed, so that the plug still remains latched. Even if you push the bracket all the way in.
