Warema WARE KNX sun shading actuator

With the WAREMA KNX SA 2M230 sun protection actuator in the REG housing, two sun protection drives can be switched with 230 V AC. Emergency and manual operation are carried out via a control mat for diagnosis and operation at the actuator. Easily replaceable fuses ensure optimal line protection for the connected components in case of a short circuit. Pre-set basic parameters allow for the selection of blinds/venetian blinds, roller shutters/textile sun protection, or window awnings with ZIP guidance. The three global safety objects and an additional safety object per output with different priorities and cyclical monitoring can be freely assigned. The response to safety objects during an alarm or after an alarm can also be selected. The actuator allows for the integration of external automation systems. This involves separating manual and automatic inputs based on fabric height and slat position. Additionally, there is the option to restrict manual operation through the automation objects (Cut Off, etc.). Received telegrams can be stored and executed after automatic shutdown; furthermore, a state after shutdown can be defined. The actuator features 8 scene objects per output. Status of fabric height, status of hold time, status of upper end position reached, and slat angle can be sent or read for each output. The creep speed during motor start-up is parameterizable, and setting correction/delay times during start-up is possible.