TE Sensors Non-contact safety switch,2NO,M12

XCSDMP coded magnetic safety switch, 2 normally open contacts, staggered switching, M12, 0.15m cable.

Features:

• Number of semiconductor outputs with signaling function: 0
• Number of contact outputs with signaling function: 0
• Number of safe semiconductor outputs: 0
• Number of safe contact outputs: 0
• Type of actuation: Magnetic
• Interface design for safety-related communication: other
• Electrical connection design: M12 connector
• Switching output design: Relay contact
• Sensor width: 25 mm
• Sensor height: 88 mm
• Sensor length: 13 mm
• Explosion protection category for gas: none
• Explosion protection category for dust: other
• Housing design: Rectangular
• Housing material: Plastic
• Housing coating: other
• Safe switching distance OFF: 20 mm
• Safe switching distance ON: 8 mm
• Category according to EN 954-1: 1
• Performance Level according to EN ISO 13849-1: Level e
• Max. output current at safe output: 100 mA
• Ambient temperature: -25 °C
• Mechanical installation condition for sensor: non-flush
• Min. output current: 100 mA
• Rated supply voltage at DC: 24 V
• Voltage type: AC/DC
• Cross/short circuit detection possible: yes
• Switching distance: 20 mm
• With monitoring function for downstream devices: no
• Suitable for safety functions: yes
• Protection class (IP): IP67
• SIL according to IEC 61508: 3
• With status indication: no
• Rated supply voltage at AC 50 Hz: -
• Rated supply voltage at AC 60 Hz: -
• Protection class (NEMA): -
• Diameter of the sensor: -.