TE Sensors E-Stop Rope Pull Switch, Right Side, PB

Area: Preventa XY2
Series: XY2CE
Reset button: Yes
Contact configuration: 2-pole normally closed
Display type: Cable tension
Maximum cable tension span: 70 m
Maximum current: 3 A AC, 270 mA DC
Maximum AC voltage: 240 V
Maximum DC voltage: 250 V
Housing material: Stainless steel (cover), Zamak (housing)
Number of cable entries: 3
Size of cable entries: ISO M20, PG 13.5
Dimensions: 229 x 105 x 142 mm

EN/ISO 13850:2006. The XY2 CB switch must not be used if the installation requires an angled installation of the release wire; this is possible with the XY2 CE. In this case, the sum of the angles through which the release wire is bent must not exceed 180°. Emergency stop cable pull switches XY2CE & XY2CB, Telemecanique. These emergency stop release wire switches are designed to reduce the risk of injury to persons and damage to machines or production products. They can be triggered by a person with a single motion when a normal emergency stop function is not available, and they also activate if the release wire breaks. The switches feature forced opening contacts, with the triggering of the switch occurring through forced actuation. The switch locks in the triggered position (normally open safety contacts open). The normally closed contact is only for signaling. Includes a reset button, which allows the safety contacts to be closed again. Restarting the machine may only occur through manual actuation of a control device within the machine's start circuit, which is located at some distance from the release wire switch. Recommended distance between cable holders is 15 m. (For XY2-CB30, a distance of 20 m is recommended.) The XY2 CE1A296 comes with a signal light (direct supply).