Tangit Pvc-U
1100 gDelivered between Wed, 17.6. and Thu, 2.7.
More than 10 pieces in stock at supplier
More than 10 pieces in stock at supplier
Free shipping starting at 50.–
Weight2
Product details
PVC adhesive based on tetrahydrofuran (THF-stabilized). Tangit is suitable for long-lasting connections of pressure pipes (such as drinking water and gas pipes) with adhesive sockets or fittings made of PVC-U (rigid PVC) according to the recommendations of the Plastic Pipe Association, as well as for bonding cable duct pipes, gutters, etc. made of PVC-U. Tangit meets the requirements of DIN 16970, the KRV guideline R 1.1.7, and the construction and testing principles for drainage systems, VBF: AI.
type of adhesive | Special adhesives |
Material application | Conduit |
Area of use | Inside |
Documents |
Item number | 5844112 |
Manufacturer | Tangit |
Category | Glue |
Manufacturer No. | TI 8 N |
Release date | 8.12.2025 |
Colour | Transparent |
Exact colour description | Transparent |
Material group | Plastic |
Material | PVC-U |
type of adhesive | Special adhesives |
container shape | Tin |
processing time | 4 min |
Material application | Conduit |
Area of use | Inside |
CO₂ emissions | 3.47 kg |
Climate contribution | CHF 0.11 |
Items per sales unit | 1 pcs. |
Weight | 1100 g |
Length | 16 cm |
Width | 10 cm |
Height | 10 cm |
Weight | 1.10 kg |
Instructions for use | Substrate pre-treatment: At least one side to be bonded must be absorbent. Most moisture-permeable substrates are suitable, e.g. wood, plasterboard, plaster, concrete, etc. Only bond dust-free, grease-free and dry materials. When gluing wood, the wood moisture content should not be above 15% and not below 8%. In the case of metals, especially lead and aluminium, remove any oxide layers immediately before bonding; sand very smooth surfaces if necessary. Application: Depending on the application, spread evenly over the entire surface with a PE glue comb. Fixing: The pressing time depends on the structure, moisture, density and shape of the material. For tension-free bonding of wood-based materials, the pressing time is approx. 9 minutes. Experience has shown that the pressing time is extended by a factor of 1.9 for tension-free bonding with a non-absorbent substrate. |
Specifications may include unverified machine translations.
GHS05 Corrosive
GHS02 Flammable
GHS07 Health hazard
GHS08 Severe health hazard- H225 Highly flammable liquid and vapour.
- H315 Causes skin irritation.
- H318 Causes serious eye damage.
- H335 May cause respiratory irritation.
- H336 May cause drowsiness or dizziness.
- H351 Suspected of causing cancer.
30-day right of return if unopened
No warranty
1 additional offer