Schneider KNX ARGUS Presence 180/2.20 m flush-mounted, Sahara, System Design MTN6302-6033

For System Design. Presence detection indoors. If the KNX ARGUS Presence detects minor movements in the room, data telegrams are sent via KNX to simultaneously control the lighting, blinds or heating, for examplexx With brightness-dependent motion detection for lighting control, the device constantly checks the brightness in the room. If there is sufficient natural light, the device switches off the artificial light despite a person being present. The run-on time can be set via the ETS. With integrated bus coupling unit. For wall mounting in a 60 mm recessed box, optimum use at 2.2 m. With creep protection. Software functions KNX Five movement/presence blocks Up to four functions can be triggered per block. Telegrams 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, monitoring, safety pause, disable function. Two motion sensors Sensitivity and range can be set separately for each sensor. Teachable staircase lighting time. Actual value brightness Can be recorded via the internal and/or an external light sensor. Actual value correction. Detection angle 180 degrees. Range 8 m to the right/left, 12 m to the front (at a mounting height of 2.20 m). Mounting height 2.2 m or 1.1 m with halved range. Time adjustable in stages from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS). Number of levels 6. number of zones 46. number of motion sensors 2, separately adjustable. Light sensor Internal light sensor continuously adjustable from approx. 10 to 2000 lux (ETS), external light sensor via KNX. EC Directives Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC. Scope of delivery With bus connection terminal and support plate. With cover segments to restrict the detection area. Painted thermoplastic material. Colour Sahara.