Schneider KNX ARGUS presence 180/2.20 m flush-mounted, active white glossy, System M MTN630425

For System M. Presence detection for indoor use. When the KNX ARGUS presence sensor detects small movements in the room, data telegrams are sent via KNX to simultaneously control lighting, blinds, or heating, for example. In brightness-dependent motion detection for lighting control, the device continuously checks the brightness in the room. If there is sufficient natural light, the device turns off artificial light despite the presence of a person. The time delay can be adjusted via ETS. With integrated bus coupler. Designed for wall mounting in a 60mm installation box, optimal use at 2.2m height. Includes anti-creep protection.

Software functions KNX: Five motion/presence blocks, with up to four functions that can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, monitoring, security pause, lock function. Two motion sensors: Sensitivity and range can be adjusted separately for each sensor. Learnable stair lighting time. The actual brightness value can be detected via the internal and/or an external light sensor. Value correction. Detection angle of 180 degrees. Range of 8m to the sides, 12m forward (at a mounting height of 2.20m). Mounting height of 2.2m or 1.1m at halved range. Time adjustable in steps from 1s to 8min (potentiometer) or adjustable from 1s to 255 hours (ETS). Number of levels: 6. Number of zones: 46. Number of motion sensors: 2, adjustable separately. Light sensor: internal light sensor continuously adjustable from approximately 10 to 2000 Lux (ETS), external light sensor via KNX.

EU directives: Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC. Delivery includes: Bus connection terminal and mounting plate. With cover segments to restrict the detection area. Material: Brilliant thermoplastic, antibacterial. Smooth and self-disinfecting surface with antibacterial properties. Color similar to RAL 9016. Color active white glossy.