R&G Glass fibre hose (45 mm) roll/ 10 m

Diameter: from 10-60 mm

Thickness: approx. 0.27 mm

Finish: Thread-Silan

Technical data at 45° fiber angle:

Diameter: 43.3 mm

Flat width: 68 mm

Weight: approx. 27 g/m

Application area:
For pipes of various diameters with high torsional rigidity, orthopedic technology (prosthetics), sports equipment manufacturing. The diameter of the hoses can be varied by compressing or stretching. Delivered in an elongated state.

Processing:
Spray the core material (e.g., metal tube) with R&G release spray "thick" (slip layer) and let it dry. Slip the hose over and pull at the ends to ensure a good fit, possibly also clamping it under tension. Apply the resin/hardener mixture with a brush. Optionally, heat the area being worked on with a hot air blower at the same time. This makes the resin/hardener mixture extremely fluid and quickly and securely impregnates the fabric (consider resin fumes, ensure good ventilation or wear a protective mask!). After curing, the core is clamped, and the tube is pulled off. Smaller components can be deep-frozen beforehand, making it easier to remove the shrunk metal core.

Please note:
For technical reasons, it is not possible to spool hoses at a fiber angle of 45°. Therefore, the quantity indication differs from the length at 45°.

Classification of the substance or mixture 4/2021:
Regulation (EC) No. 1272/2008
The mixture is not classified as hazardous under Regulation (EC) No. 1272/2008.

Labeling elements

Other hazards:
Inhalation of dust and fibers may cause temporary irritation in the mouth, nose, and throat. Contact with eyes from dust and fibers may cause itching and temporary irritation. Skin contact: Dust and fibers from this product may cause itching and short-term mechanical irritation.