
WD Gold
18 TB, 3.5", CMR
WD Gold
18 TB, 3.5", CMR
...Digitec Galaxus already gives a 5-year guarantee, but only with an extra charge, see "Guarantee services". Which is nothing but a rip-off when the manufacturer gives a 5-year guarantee anyway! That's a bottomless impertinence from Digitec Galaxus.
Thanks for the info!
After a corresponding review, we were able to adjust the warranty period to 5 years.
Thank you for pointing this out, we have adjusted the warranty periods.
CMR: conventional magnetic recording CMR, or Conventional Magnetic Recording, is the most commonly used recording technology. In CMR discs, data is stored on the surface of the disc in the form of magnetic grains. Each grain represents one bit of information, and these bits can be read and written independently. This allows great flexibility in writing and reading data. The advantages of CMR lie in its reliability and consistent performance, making it the preferred choice for applications requiring sustained read and write speeds. CMR hard drives are ideal for servers, workstations and high-end storage systems. However, they are limited in terms of capacity and are more expensive than SMR drives. SMR: multiple surface magnetic recording Shingled Magnetic Recording (SMR) is a different technology from CMR. In SMR discs, the tracks are narrowed as much as possible to keep pace with users' ever-increasing capacity requirements. This means that more data can be stored on the same surface, but there is a slight compromise in terms of writing performance. SMR drives are particularly suited to applications requiring large-scale storage at relatively low cost. They are often used and recommended for data archiving, backup systems and other applications where write speed is not the main priority. Data recovery from SMR disks Due to their increased complexity, SMR disks are less reliable than CMR disks. This is why they are often found in high-capacity models for the general public. If an SMR drive fails, data recovery is more complex due to the overlapping track layout. Recovery techniques may require special procedures to avoid damaging neighbouring data. This has an impact on the cost of data recovery. Experienced professionals are recommended to deal with damaged SMR disks, which, more than ever, require special skills to maximise the chances of recovery.
Thank you for pointing this out, we were able to adjust the warranty period.
Installation: connect to power and Sata connection and insert into your system, screw on, etc., switch on power and then "partition or format" in the disk manager of your operating system...
Thank you for pointing this out, the guarantee has been adjusted.
It depends on how well you decouple the plate. Noise is mainly caused by vibrations, which can be transmitted to the enclosure. The installation situation is decisive here. For a normal PC, I finally decided on a WD Red 8 TB, which has a fairly high data throughput and is very quiet.
The item is the WD8004FRYZ, should be CMR accordingly. Mine matches the item specification and is a CMR. As far as I know, all "WD Gold" should be CMR. Can't tell you much about the WD Red Pro as I don't own one.
The Synology Compatibility List does not list this HDD (https://www.synology.com/en-us/compatibility?search_by=products&model=DS215j&category=hdds_no_ssd_trim&filter_size=16TB&p=1). It may work, but without warranty. But even if it does work, I would not recommend using it in a living room: It would probably be very noisy, since the Synology NAS case is made of plastic and amplifies vibrations.
...right CMR !!! A lot of things are not right at Digitec Galaxus, the descriptions, the specifications or are incomplete and the guarantee is also not always stated correctly. Price errors are also possible.
According to the specifications, the enclosure has one bay each for 3.5 and 2.5 inch hard drives. The M.2 hard disk hangs somewhere on the Mohterboard anyway. In this case, the answer is: NO.
So I got both of mine in a "Moisture Barrier Bag" with WD stickers (serial number etc.), which I guess would be bulk version....
Ja, diese HDD ist kompatibel mit Ihrem NAS. Kompatibilitätsliste: https://www.synology.com/en-global/compatibility?search_by=products&model=RS819&category=hdds_no_ssd_trim&filter_brand=Western%20Digital&p=1
Thanks for the tip! "She should work", hahaha... She should work! And for a long time!
Thanks for the info! :-) We have now adjusted the guarantee accordingly.
20 of 20 questions