CHF945.29 currently CHF1235.– new
Roborock Saros 10 R&D with water connection
22000 Pa, Wiping cloth
Questions about Roborock Saros 10 R&D with water connection
What would you like to know?
0 questions and answers
These are relatively thin hoses with a diameter of approx. 5 mm. For the waste water, this hose can simply be inserted into the waste water pipe in parallel with a normal washing machine drain. A connection coupling is supplied for the supply line, which can be installed in a water pipe and into which the supply line can be coupled.
The Roborock Saros 10 with fixed water connection has the technical possibility to be connected to a permanent water pipe, but the necessary water connection hoses/adapters for the house installation are not automatically included in the package, you need extra connection material to actually set up the fixed water connection.
digitec
6 months ago
Helpful answer
The robot is 7.98 cm high. The dustbin empties automatically into the base station. The detergent is filled via a tank built into the station, without the need to open a top lever. This compact height means it can be slid under a washbasin drawer if there is more than 8 cm of free space.
Automatically generated from the .
Unfortunately, there is currently no exact information available on the dimensions of the fresh water and waste water hoses of the Roborock Saros 10 with water connection.
Helpful answer
Except for what is needed for the power cable plug (approx. 3cm at the back), a few cm to the side or top for the hoses depending on the installation radius, only to the front for moving in and out approx. 80cm-1m
digitec
10 months ago
The instructions state that the connection can withstand a maximum of 4 bar. It is therefore advisable to use a pressure reducing valve if the water pressure is higher to prevent damage.
Automatically generated from the .
This is possible, see instruction 043 under the following conditions: https://support.roborock.com/hc...
8 of 8 questions