CHF299.–
Pioneer SPH-DA360DAB
Android car, Apple Carplay
Questions about Pioneer SPH-DA360DAB
What would you like to know?
0 questions and answers
You need a specific car model canbus I don't think buttons on the steering wheel will work
Helpful answer
Yes, it is compatible with the corresponding adapters and the corresponding covers for installation, and there is also an adapter set for any steering wheel controls
Helpful answer
Good morning. Unfortunately, I can't help you any further. I am using the car radio without a protective film.
I wonder if it needs it at all?
Good luck with your search. Greetings Alex
Helpful answer
To update the Pioneer SPH-DA360DAB, download the firmware from the Pioneer website, extract the files to an empty USB stick and install them via the "System Information" -> "Update" menu in the device
digitec
4 months ago
The Pioneer AVIC X1 harness is not necessarily directly compatible with the Pioneer SPH-DA360DAB harness, as the connectors and connections may differ between these models.
The SPH-DA360DAB uses a standard ISO connector for power and speakers, but to maintain steering wheel controls and other specific functions, it is often necessary to use a CAN-bus interface or adapter adapted to the vehicle and car radio model.
It is therefore recommended that you check the compatibility of the connectors and, if necessary, use a specific adapter to ensure correct and functional installation of the SPH-DA360DAB as a replacement for the AVIC X1.
Automatically generated from the .
Your handbrake switch may work "differently" than Pioneer intended. You can also connect the corresponding light green cable directly to vehicle ground...
Helpful answer
if there's a 2 din space for the car radio, why not, music softens the nerves and covers up the engine noise ;-)
I haven't tried it, but it shouldn't be a problem, there is only one mono output.
digitec
11 months ago
Yes, you can use the speaker outputs of the internal amplifier (for the speakers) at the same time as the pre-out connections (for the subwoofer). The device has 3 pre-amplifier outputs (front, rear, subwoofer) and an internal 4x50W MOSFET amplifier, which enables parallel use.
According to the technical specifications, no additional amplifier is required for the speakers - these can be connected directly to the radio, while the subwoofer is operated via the RCA pre-outs with an external amplifier.
*Note:* The pre-outs are intended exclusively for connecting external amplifiers, while the speakers can be connected directly to the radio. A combination of both connection types is possible without any problems.
Automatically generated from the .
Forgotten the blue AMP cable?
This must be connected for the amplifier to switch on.
digitec
1 year ago
Helpful answer
The device is a 2-DIN car radio, which means that it fits into most vehicles with a 2-DIN slot. Whether it fits specifically in your Seat Exeo ST depends on the dimensions of the radio slot in your vehicle. You should check the dimensions to make sure it fits.
The DAB+ antenna is optional and is not supplied as standard. You can purchase the CA-AN-DAB.001 antenna separately to utilise DAB+ functionality.
Automatically generated from the .
Helpful answer
Hello, for your aerial you can use this Blaupunkt DAB-S-22A device which allows Dab+ reception with an FM/AM aerial without installing additional antennas (make sure, however, that your aerial is not amplified otherwise it will not work properly). To keep the steering wheel controls, you need a Can-bus adapter for Mazda, which is not available on Galaxus.
Helpful answer
Yes I mounted it works fine you have to put a canbus and chassis adapter
Helpful answer
With an appropriate radio panel and the right adapter plugs, it should work. However, if the Mito still has steering wheel controls and sat nav, I would leave the replacement to a specialist (in this case, you would need the right interface modules and control units).
In my Zafira, I also had the specialist do it, but my DAB aerial and the PGS module were neatly installed behind the panelling. Usually takes about 3-4 hours.
digitec
1 year ago
Helpful answer
To install the car radio in a Peugeot 207 CV, you need to make sure that the radio is the right size and is compatible. The SPH-DA360DAB is a 2-DIN device, which means that it fits into most 2-DIN slots. However, compatibility may vary depending on the vehicle model and equipment. It is advisable to check the specific requirements of your vehicle and, if necessary, consult a professional to ensure that the device is installed correctly.
Automatically generated from the .
digitec
1 year ago
Helpful answer
The Pioneer SPH-DA360DAB car radio can be installed in a 2012 Mercedes Vito W639, but it requires some precautions and possibly additional components.
- The car radio is a 2-DIN model, which is compatible with the standard dimensions of the Vito W639.
- However, it is important that you use the correct adapters and cable kits for installation in your specific vehicle model. These kits should allow control of the steering wheel controls, connection to any reversing cameras and other vehicle systems.
- Professional installation or careful planning is recommended to ensure that all functions are integrated correctly.
Before installation, you should therefore carefully check the necessary adapters and instructions and seek professional help if necessary.
Automatically generated from the .First things first, via USB or WiFi ? Did you read the manual ? (RTFM)
Yes, you still need various material I still needed
Radio cover
Can Bus adapter that the remote control from the steering wheel worked again
I have changed the antenna for dab but there are also adhesive antennas I have mounted a combination antenna with dab fm and gps
With the antenna there are adapters for dan but does not work with every antenna
30 of 91 questions