Hello Fubelchen
Please follow the instructions on pages 12-13 of the German operating instructions exactly. Only one phone can be connected via Bluetooth. Some devices require a PIN (in addition to the 6-digit pairing number). This PIN would then be "0000". If you proceed in exactly the same way, it should actually work. Good luck!
Kind regards
Andy
It does not have an internal aerial, this item is supplied with an adhesive windscreen aerial. The same radio can also be ordered without an aerial, in which case the last two letters (AN) are missing from the radio type designation.
Hello Gebbini
A Peugeot representative can tell you exactly which cable you need. (Depending on the year). However, the cable can easily cost as much as the radio (+/- CHF 80). You may also find what you are looking for on the Pioneer homepage.
For the Pioneer MVH-330DAB car radio, beberapa options for DAB+ antennas are suitable to ensure optimum reception:
## Recommendations for DAB+ antennas
- Roof antennas: A roof antenna with a radiator of 44 cm or, if this is too long, a shorter version of 23 cm, offers the best reception. These antennas are specially optimised for DAB+.
- Passive or active antennas: It is advisable to use a passive antenna that allows the VHF-3 band (DAB+) to pass through. If an active FM antenna is already present, a passive DAB splitter (crossover without amplifier) can be used to separate the DAB+ signal.
- Disc antennas: Windscreen aerials, especially if they are mounted vertically at the front of the vehicle, can also provide good results. It is important to position the antenna wire about 5 cm from the spar and to bond any ground foils to ground.
## Connection and installation
- Ensure that the antenna is properly connected and installed. A 12 volt power supply via an external cable or phantom power may be necessary.
By using one of these antennas, you can achieve a stable and clearer DAB+ reception with your Pioneer MVH-330DAB car radio.
To find the settings for the subwoofer on the Pioneer MVH-330DAB, follow these steps:
1. open the menu: Press the button that opens the menu, usually the button with the symbol of a gear or screw.
2. audio settings: Navigate to the audio settings in the menu.
3. equaliser or bass boost: Look for options such as "equaliser" or "bass boost", as these often contain the settings for the subwoofer.
4. subwoofer settings: If available, you will find specific settings for the subwoofer, such as adjusting the subwoofer frequency or level.
If you cannot find these options, you can also consult the operating instructions for the device, which are usually included in the scope of delivery or are available online.