I think the picture is probably wrong. In any case, I had received a D4S, as in the description.
It is important that the light colour is correct and this is indistinguishable from the original. Excessive deviations, such as completely white or bluish colours, may not be MfK-compliant. This one has already passed the MfK.
The light colour is defined by "K" = Kelvin. The original is apparently around 3500-3800K.
Hello The Osram Xenarc D3S automotive lamp has not been developed specifically for the Alfa Romeo Stelvio 2.0 Q4 280PS petrol. To ensure compatibility, you should check the specific requirements of your vehicle. The D3S bulb is often used in vehicles that have HID headlights, but it is important to confirm the exact bulb size and type of your vehicle.
Hello jonasbieri, according to internet forums you should need a xenon bulb with the 3DS base. If one of your bulbs is defective, I would remove it so that you have the exact designation of the base type, light output and light colour. I would recommend that you replace both bulbs, as experience has shown that the other one will also fail in 1/2 a year and the luminous intensity will not differ between the two. Important: When replacing the light, make sure that it is switched off and that you do not switch it on accidentally using the Cominghome function, otherwise there is a danger to life - switch-on voltage of several 1,000 V - otherwise it is not rocket science. Good luck -;)
According to our information, it is only the burner, without the ballast. We will adjust the picture as soon as possible. Many thanks for the information!
The best thing to do is to dismantle the lamp and write down the type. Then search for this lamp and you will find the right one... Otherwise go to a specialist workshop
Hello, you must look at the designation D3S or D1S ... ... This is the designation for the socket. VW, Audi, Skoda usually have the D3S socket. However, it is always advisable to look at the burner.