That's not a question, just a guide!
Under Menu Instructions
1) To enter the sub menu:
Press light button + on/off button at the same time
2.)To move in the sub menu:
01->02->03->04->05->06-07->08->09->10->00 = Press the light button once
3) To move in the settings of each function:
Upwards: 02/01 -> 02/02 = Press the on/off button once
4.)Downwards: 02/02 -> 02/01 Press the light button twice
5)To exit without saving:
Simultaneously press the light button + On/Off button
6.)To save the setting:
00/0 -> Press the On/Off button once
Ocean Drive S9 Under Menu
(01 / 85) = wheel size inch = 8.5 inch size)
(02 / 0-60) = Standby mode - (02/1 = 1min)
(03/ 1-7 = Display light intensity)
(04 / 1 = 20km/h), (04 / 0 = 25km/h) = speed)
(05 / 0 = On) (05/ 1 = Off) = Kick Start)
(06 / 0 = Off), (06 / 1 On) = Cruise control)
(07/ 5-16) = Engine power)
(08 / 1) = Reset odometer reading)
(09 / 0 = Km/h), (09 / 1 = Mp/h)
(10 / 30) = 30km/h)
(00) = Save setting)
Remarks
1.)Changing the speed and power of the motor can affect the range. This applies to adjusting the following settings: 04/07/10.
2.)Setting the wrong wheel size at 01 in the menu can lead to incorrect speed measurements and incorrect odometer readings.
3.)Standby mode 02 = How long the scooter stays on before it is automatically switched off when inactive.
4.)Kick-start 05 = If you deactivate the kick-start, the scooter will drive without you having to accelerate with your foot.
5.)Cruise control 06 = Activates after 6 seconds if you press full throttle, so that you do not have to press the accelerator all the time.
6) Mileage reset 08 = If you press the on/off button once, the mileage is reset directly to 0!
Under Menu Factory settings
01/085
02/10
03/03
04/01
05/00
06/00
07/13
08/00
09/00
10/20