Questions about NZXT H510

Two fans are already mounted on the enclosure.

It does not have a corresponding riser with it. I wouldn't recommend it either, because the glass front blocks the air supply. If so, then only with water cooling.

Hello The motherboard fits. However, if you want to install an aio waKü at the front, better measure the kraka and the thickness of the radiator incl. fan. For 4080, the available space might be too small.

My 3080 would not have room for it

Yes.

Noctua NF A12 they have 15mm thickness instead of 25mm as with all common fans

Exactly, any ATX size power supply fits.

Mini-ITX, MicroATX and ATX

you can install the 240mm rad in the front. the airflow in the housing is generally not that good. I would rather take the ML120L and install it on top.

Yes, no problems

I guess there are no NZXT cases without glass. What I do recommend is the "Corsair Carbide 270R". It looks almost the same, it has no glass on the side, but it is from Corsair.

Yes, it fits perfectly

Can you send us a link to the product? We would be happy to check a possible inclusion.

The front is equipped with two 120 mm fans. But you can also install two 140 mm fans instead.

Make sure your motherboard has enough rgb fan connectors, otherwise you will need an rgb controller. You can fit a dual 120mm fan in the front (maybe 140 but I'm not sure), I have one from corsair that works pretty well.

Hello and good day I have installed large CPU tower cooling in this enclosure and it went without a hitch! The graphics card also occupies 2 slots. Water cooling for RTX3070 should also not be a problem! However, you should know that no built-in drives (DVD) can be installed! (Front side is a closed unit)

There is definitely room to install it. Non-RGB fans are also supplied. To be able to control the RGBs of the fans properly, however, you would probably need the fan RGB controller from NZXT.

According to our research, yes.

This must be an error, please contact customer service under the "Help and contact" tab. The box will probably be shipped within the day.

um yes 2 Cooling Features Number of fans 2 x

There are 3 X enclosure fan headers (4-pin) on the mainboard. You can connect the fans there. The connections are standardised and also work with the NZXT H510 fans. https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_STRIX_B550-F_GAMING/G16610_ROG_STRIX_B550-F_GAMING_WI-FI_UM_WEB.pdf

So the mainboard and the graphics card in the custom cooling design should definitely fit in but I don't know if it's the right case for a custom water cooling but a compact water cooling for the CPU shouldn't be a problem either.

...make an RMA directly with NZXT.

https://www.nzxt.com/products/h510-matte-white#product-spec

The supplied fans fit perfectly

In this case, please contact our customer service directly so that your request can be checked and you can be helped accordingly. https://helpcenter.digitec.ch/hc/de/requests/new

I have about the same configuration, but the CPU with a good big ventirad, and no worries. If you want to put both in watercooling, take rather a bigger case... this one is likely to be limited in the number and size of the radiators. ( 2x 240 impossible)