CHF99.90
Noco GB40 genius BOOST
1000 A, 2150 mAh
Questions about Noco GB40 genius BOOST
What would you like to know?
0 questions and answers
Capacity: 2150 mAh
Former employee
7 years ago
This video is available to inform the customer of the limitations of the product and the type of use possible.
Helpful answer
Possibly on the Genius homepage. There are also many reviews on YouTube.
I bought the "Swaytronic All in One Jump Starter 18'000 mAh" -> it has more connection options, but is not as robust as the GB40.
Former user
8 years ago
Helpful answer
Buy the bigger one, the 40 doesn't do it. I have a Mercedes Sprinter 316 (2.2l diesel),
and the 40 was not enough (yesterday). In parallel with a second booster (Fluxon) it worked.
For petrol engines, both the 40 and presumably the other boosters are sufficient (Fluxon
worked with a 3.0l petrol engine), but not in winter, near zero and below, nothing works.
Only a warm booster is a good booster...
I have now ordered the GB70, let's see if it's enough for the 2.2l diesel.
Former employee
3 years ago
Thank you for your feedback on the product. :) We invite you to give your opinion under evaluations, if you wish.
Former user
7 years ago
The device can be charged with a normal USB cable via a commercially available USB adapter. The charging cable is included; the adapter is not
Voilà: Noco Genius OBD2 Connector
In the standard configuration, yes. However, for the jump starter to be used in this (safe) configuration, the battery must have a residual voltage so that the device is recognised and sets itself automatically. If the battery is completely empty, you have to press the "Override" button, then you can also start a "dead" battery, but the safety and protection functions are switched off, so that the device is no longer "foolproof" in this configuration: You have to pay attention to the correct polarity, do not hold the terminals together and do not make any other contact with the car body, otherwise there is a risk of a highly dangerous electric shock! As I said, none of this can happen in the standard configuration (override to OFF). Noco is known for this safety device, but it should not normally be tricked.
Helpful answer
The scope of delivery includes a charging cable with the following connections
- Micro-USB (see product image USB IN on the booster)
- USB A for charging at any mains charger
There is also an adapter for a 12V cigarette lighter socket to which the charging cable can be connected.
However, this is not much use if you have to bypass the car battery... ;-)
digitec
4 months ago
Yes, you can use the GB40 for your Toyota Yaris. The GB40 is suitable for vehicles with petrol engines and should also work for hybrid models, as it is designed for vehicles with engines up to 6 litres in capacity.
Automatically generated from the .
Helpful answer
Hello and good morning, I drive a 3.7l V6 and it works perfectly.
Helpful answer
Yes, that is possible. I've already had to try it out myself with my Toyota Prius.
digitec
9 months ago
Helpful answer
1000 A is usually sufficient to start small to medium-sized vehicles, such as petrol engines with a capacity of up to 6 litres and diesel engines with a capacity of up to 3 litres. However, the output depends on the specific requirements of the vehicle and the conditions of the battery.
Automatically generated from the .So mine has a micro USB-B connector. I don't know if they've changed it to USB-C.
digitec
10 months ago
The NOCO GB40 is not specifically designed for electric vehicles such as the Hyundai Kona 64 kW. It is mainly designed for petrol and diesel drives and does not support a direct jump-start function for electric vehicles, as these do not have conventional batteries that need to be started. There is no direct jump-start method for electric vehicles as there is for combustion engines. If you have problems with your Hyundai Kona, you should contact a specialist.
Automatically generated from the .digitec
11 months ago
Helpful answer
The NOCO GB40 Genius Boost comes with a storage bag as standard. The GB40 comes with a soft microfibre drawstring bag in which you can store the device and its accessories. It is therefore not necessary to buy a separate case to store the device.
Automatically generated from the .digitec
11 months ago
Storing the NOCO GB40 Genius Boost in the car is not necessarily a problem, but there are a few things to bear in mind:
- Temperature: The device can be used at an operating temperature of -22°F to 122°F (-30°C to +50°C) and a storage temperature of -4°F to 122°F (-20°C to +50°C).
- Charging and discharging: It is important not to charge and discharge the device at the same time as recommended by FCC regulations.
- Storage: Ensure that the device is stored in a dry and protected area to prevent damage.
Overall, the GB40 Genius Boost is robust enough to be stored in a car as long as the above conditions are observed.
Automatically generated from the .
digitec
1 year ago
Helpful answer
To keep the Noco GB40 booster battery healthy, we recommend recharging it periodically, even if you don't use it frequently.
- The GB40 can retain its charge for up to a year, but it is advisable to recharge it every 3 to 6 months to maintain the condition of the lithium-ion battery.
- This will help prevent any degradation of battery capacity due to long periods of inactivity.
Automatically generated from the . Helpful answer
In addition to the traction battery for the drive, electric cars (yes, including the Enyaq) also have a 12V on-board battery to power the central locking system, lights, radio, sat nav, etc. The 12V battery is also needed to start the car. The 12V battery is also needed to start the car. Here you can of course use the booster to start the car in the event of a discharge or failure. The booster is of course far too weak for the drive ;-)
Helpful answer
this takes about the same time with all "normal and current" power supply units (if that is what was meant?). As the current and voltage are limited and the Noco does not allow "fast" charging. The device actually gives you the answer itself --> 3h, not much can be done about that, except that it can take longer if you use a bad or old charger.
It has a USB input to charge the GB40 and a USB output to charge a mobile phone with the GB40, for example. Could it be that you have mixed up the connections? If that doesn't help, ask for a guarantee and send it back. I have 2 GB20s and 2 GB40s and am very satisfied, but unfortunately I also had to send one back because it wouldn't charge, but it wasn't a problem, I got a new one after two days.
Helpful answer
Yes, I have an Ioniq5 and have already boosted the 12V battery twice with the GB40. Works perfectly 👌
In this case, please contact our customer service directly so that you can be helped accordingly. :)
helpcenter.digitec.ch/hc/en/requests/new
Helpful answer
Yes, that should do it.
Helpful answer
If the battery is discharged but not faulty that should be more than enough. I have started a 2.2l diesel with a flat battery without any problems.
30 of 47 questions