Questions about Nc-17 3D Universal Holder

ja

If the Popsocket is not too thick then yes. With the foam supplied, the holder can be adapted to phones of different thicknesses. In addition, the arms are not completely rigid, which gives you even more leeway. I can't guarantee anything! However, if the Popsocket does not stick out too far, this should not be a problem.

The sizing is very accurate and there is virtually no room for manoeuvre. I have to use a narrower case with the S23 Ultra so that it fits in. Otherwise, mount it without a case. I was surprised how well the mobile sits in the holder. Hope that helps.

Yes it is

... depends on the width of the bars ..., I have it on the bike - i.e. cca 4-5 cm diameter

I used it with iphone and samsung using a UAG case which is pretty bulky.

The holder that holds the mobile phone automatically locks into place and does not come loose under any circumstances. Only the ball head and the attachment to the handlebars can come loose after longer trips if they are tightened by hand. However, I tightened them once with a tool and since then the thing has held perfectly, I have driven 800km to France without tightening it once.

Works without problems, I also use it with an S10 with case and earlier even with a Huawei Mate 20 (~6.5 inch) with case.

Hi Gizmo87 Which Xiaomi phone do you have? The description states: "phones with widths 56-92 mm, lengths 114-182 mm". So measure up or google mobile phone dimensions :)

Yes, this should work, the manufacturer states that smartphones with a length of 114-182mm, width 56-92mm and thickness up to 12.5mm will fit, the IPhone 11 Pro fits into these specifications.

Yes, but it depends on the thickness of the handlebars. According to the description, "Quick and easy installation possible on any handlebar with a diameter of 22-32 mm".

Practical holder for large iPhones, screen remains stable and easy to read even during fast, bumpy rides. I am satisfied

I would go for the mass, as the inch specification makes little sense with edges of different thicknesses. The holder works perfectly with my iPhone XR 6.1" (75.7 mm x 150.9 mm). The holder can be adjusted continuously within the range described by the manufacturer. There are also several inserts to adjust the holder to the depth of the phone.

This is not an answer, but a follow-up question: Are iPhones usable?

Yes Fits. Also have an S10

The product works for Samsung Galaxy S8 (5.8") and Galaxy S10 (6.1"). Therefore, I assume that it will also fit Galaxy S10e (5.8").

No, you can't take the phone out one-handed - you need two hands to push down the locking lever at the back and turn the wheel.

Yes, you have a wheel at the bottom and so you can turn the holder in any direction.

The holder only holds to a limited extent when cycling if the road is medium to very rough. The mobile phone is shaken so hard within a few hundred metres that it practically opens the holder.

Yes, the arms are very long and therefore fit practically all smartphones without any problems. The maximum and minimum dimensions are described exactly in the description ;)

Yes, according to our information, this holder would fit. However, to process the order, please contact our customer service at galaxus@galaxus.ch.

What is the part "G"...? Assuming that this is not included in my bracket either, the thing holds very very well!