Questions about Kingston FURY Beast

Assuming that your ream is a 3200 megahertz/MHz DDR4 DIMM, it is compatible without any problem. Be careful to select DDR4 as a DIMM.

The Kingston FURY Beast RAM (2 x 32GB, 3200 MHz, DDR4 RAM, DIMM) with product ID KF432C16BBK2/64 could work in an HP Z4 G4 workstation with Intel Xeon W-2225 processor, but there are some important considerations: ## Compatibility - The HP Z4 G4 Workstation supports DDR4 RAM, which matches the specifications of the Kingston FURY Beast RAM. ## RAM type - The HP Z4 G4 Workstation typically requires UDIMM (Unbuffered DIMM) or RDIMM (Registered DIMM), depending on the configuration. The Kingston FURY Beast RAM is a UDIMM, which should be compatible in many cases, but make sure your system supports UDIMM. ## RAM speed - The Intel Xeon W-2225 processor typically supports RAM speeds up to 2933 MHz, but the actual speed will depend on the BIOS configuration and specific motherboard settings. The Kingston FURY Beast RAM runs at 3200 MHz, but this could be lowered to 2933 MHz or even 2666 MHz depending on the system configuration. ## Dual or Quad Channel - For the best performance, make sure that the RAM modules are configured in Dual or Quad Channel. The HP Z4 G4 Workstation supports up to 8 RAM slots and 4 channels, which allows a Quad Channel configuration if all slots are filled with suitable modules. To summarise: The Kingston FURY Beast RAM might work, but you should check the specific requirements of your system, especially the RAM type and supported speeds, to make sure it will work optimally.

Thank you for your feedback. We are very sorry that these incidents have occurred. We will forward your review internally to the relevant department.

This ram is not support ECC.

Ja passt

Yes, that works without any problems. DDR4-3600 would be optimal for Ryzen. And update the BIOS, there is always optimised RAM support.

passt.