CHF158.–
Hyte Y60
ATX, ITX, mATX
Questions about Hyte Y60
What would you like to know?
0 questions and answers
Helpful answer
jes, but needs work to make everything tight
digitec
2 months ago
Helpful answer
Yes, a graphics card up to 375 mm in length can be installed in the housing. Depending on the model, the Nvidia RTX 5070 usually has a length of less than 375 mm, so installation is possible as long as the specific model does not exceed this length. The housing supports graphics cards with a maximum length of 375 mm and a maximum width of 75 mm.
Automatically generated from the .digitec
2 months ago
Yes, a graphics card such as the RTX 5070 can be installed in the housing as long as it is no longer than 375 mm. The maximum graphics card length is 375 mm, which is sufficient for most RTX 5070 models. The graphics card is mounted vertically and the case supports modern GPUs with a PCIe 4.0 riser cable.
Automatically generated from the .
Helpful answer
Yes is possible
However, only standard radiator no thicker ones such as from Arctic
digitec
1 year ago
Helpful answer
The Hyte Y60 comes with three pre-assembled fans:
- Two 120 mm fans in the lower chamber.
- One 120 mm fan at the rear of the case.
Automatically generated from the .
digitec
1 year ago
The Hyte Y60 case is designed with specific mounting points that make it challenging to install three 120mm fans in a row on the side panel without some modification.
- The case is intended to mount two 120mm or 140mm fans beside the motherboard tray, but it does not natively support three fans in a row due to the alignment of the mounting holes.
- To install three 120mm fans on the side, users have resorted to creative solutions such as using Lego pieces, zip ties, or custom brackets to secure the middle fan, particularly when using Lian Li fans that can daisy chain together.
Automatically generated from the .
2x 120mm are also possible
yes, with this
Silverstone SST-PP08 Power Adapter Cover for SFX to ATX
Correct. The three fans are included. One at the back and two at the bottom. The other product is a riser cable. It is used to mount the graphics card vertically. Normal mounting is not possible.
Helpful answer
I have this setup. It was the biggest mistake ever. I have the AORUS GeForce RTX 4080 16GB MASTER.
The card fits, but there is only about 2mm space between the glass and the card. This leads to overheating.
I left the case open for six months until the solution arrived. A custom acrylic panel with perforation:
https://www.etsy.com/ch/listing/1486764631/hyte-y60-custom-beluftetes-seitenteil
A joke, but unfortunately not from us. Thank you for pointing this out, we have found the error in the system.
Helpful answer
Hello,
According to the information available in our database, a batch of this article should reach us this month, but unfortunately without any guarantee.
Unfortunately, we cannot organise either. Regarding tempered glass, it is best to contact the manufacturer: https://support.hyte.com/hc/en-us?_ga=2.8393719.35965946.1661884318-415838632.1661884318
Yes, the top and rear covers and the filter frame at the bottom are only plastic.
But above. On the side only 240mm
Yes, of course, that's no problem. You can use normal ATX power supply units.
Yes, it is the colour snow white (CS-HYTE-Y60-WW).
Helpful answer
I have a 4090 from Gigabyte air-cooled. It still has about 4mm of space to the glass. Certainly not ideal, but after countless hours in Cyberpunk2077 it didn't get above 60°C. I have not made a real benchmark. But I would be happy to do that on request.
We should probably be able to list the case soon. I am still clarifying this and will give you feedback here again.
You are welcome to contact our customer service directly regarding the product recording: https://helpcenter.digitec.ch/hc/de/requests/new
Helpful answer
yes, 3x 120mm are installed. Two in the bottom for intake air and one in the top rear as outtake air. The fans are black and the blades grey.
Helpful answer
Yes
28 of 28 questions