
Govee Smart
Govee Smart
As far as I know, our light strip does not reset itself. We have hung it in our party trolley. We have a cable reel there that we pull into the trolley every time and attach the light strip, and it adopts the colour from the previous setting. This should not be a problem in your case, as it always works for us. Greetings
This is probably an error. We will correct the data sheet as soon as possible. In the meantime, you can find detailed specifications on the manufacturer's website: https://eu.govee.com/products/govee-rgbic-wi-fi-bluetooth-led-strip-lights-with-protective-coating
2 months ago
The width of the strip light is not explicitly specified. However, you cannot simply cut the strip light at 4m 20 as it has fixed interfaces to ensure the function and connection of the LEDs. It is advisable to follow the manufacturer's instructions to preserve the integrity of the product.
Automatically generated from the .2 months ago
The LED strips from Govee are usually self-adhesive as they have an adhesive surface on the back which allows them to be easily attached to surfaces. However, I have no specific information on this product model to confirm this with certainty. It would be advisable to check the product description or packaging to ensure that they are self-adhesive.
Automatically generated from the .I have given Govee Smart as a gift. Sorry can't give any details.
3 months ago
The distance between the individual LEDs in Govee LED strips depends on the specific model range. In general, LEDs in LED strips are often arranged close together to ensure uniform illumination. Whether the individual LEDs are visible depends on the density of the LEDs and the type of cover. Some models have a transparent or diffuse cover that reduces the visibility of the individual LEDs. For specific details on this product, I recommend consulting the manufacturer's technical specifications.
Automatically generated from the .4 months ago
The LED strip "Smart (RGBIC, 500 cm, Indoor)" from Govee is not extendable. The information did not indicate the possibility of extending this specific strip.
Automatically generated from the .Hello Alessandro In my opinion, the power supply unit should be fed with a 220V or 230V connection on the primary side, but I can't tell you whether it would also work with 110V. Otherwise, connect a small transformer in between to transform the voltage from 110V to 230V.
Also works via Bluetooth but cannot be used via Smarthome (alexa, siri).
You can cut the LED strip (every few cm there is a line on the strip that shows where) but you can't connect the power supply cable afterwards. It might be solderable but I can't say for sure.
They have no rubber surface
This item: Govee LED Stripe Smart (RGB, 1000 cm) differs as follows: RGBIC effects Works with Govee Home App, compatible with Amazon Alexa and Google Assistant. Luminaire with fixed LED bulb - over 16 million colour options Controllable via Bluetooth and WLAN Expansive music sync mode 64+ preset scene modes For this product: Govee Smart (RGB, 1000 cm) RGB light strip - 5m x 2 rolls Works with Govee Home App Compatible with Amazon Alexa and Google Assistant Music sync mode: with the high-sensitivity built-in microphone, your lights can dance to the beat of your songs. Easy installation
Ca 3.5 cm
they are RGB
This should be possible, but the LED strip can only be switched on and off with the smart plugs. All other settings would still have to be controlled with its own app.
This item has a classic power connection with a 2-pin plug. For a product recommendation, it is best to contact our customer service department directly at https://helpcenter.digitec.ch/hc/de/requests/new. Your enquiry can then be examined individually.
According to our information, approx. 1cm.
Unfortunately no this is not possible because the supplied transformer does not provide enough power and it either breaks all the strips, flickers or only one part lights up.
We are checking with the supplier and will get back to you as soon as possible. Thank you for your patience!
According to our information, voice commands can be executed via Alexa.
15 m = 1500cm
To reconnect the shortened LED strips to the original, conventional LED 4-pin connectors can be used.
This is a mistake, it is 5m. Prices are based on supply and demand, suppliers and availability of goods. For all these reasons, prices vary regularly and may vary from one model or colour to another, for example.
According to the information available to us, the wall plug should be provided. When switched off, the strip itself is white (but offers a panel of ~16 million colours when switched on). Unfortunately, the manufacturer does not specify the number of LEDs per metre.
Unfortunately, the manufacturer does not give us any information about it, as it falls under the category "decorative luminaire". And therefore no LM and W specifications are necessary.
29 of 29 questions