Questions about Gigabyte Z390 Aorus Pro WiFi

Yes, the motherboard is compatible with all i9core 9generation but I don't know about the ram. I put my RAM DDR34 - 3200. So for the 3600 RAM it would be necessary to modify some parameter on the Bios! for the rest the card is perfect for me^^

Hello... Of course, there is software available from Gigabyte for this purpose. This is called "RGB Fusion 2.0". But beware, this program is the same as rubbish. If you are lucky, you can set all your RGB of the mainboard without problems, but often this program causes problems. Go to Google and see how badly RGB Fusion 2.0 is written. I'm still having problems at the moment too. I set the RGB, then at some point it doesn't work again, or the graphics card is no longer recognised, etc....

Should work. You can then no longer use the heat sinks that are already included with the board. But that shouldn't matter. Otherwise, just take one (e.g. Samsung EVO 970) without a cooling element if you want to use the cooling elements of the MB.

Taken from the description: Size: ATX Length 305 mm Width 244 mm

Hallo, it works.

There was none with the mobo. But there was one with my Cooler Master Hyper 212 aftermarket CPU cooler. I still recommend you get some Arctic Silver for 10.- as its slightly better.

Hi, yes you can connect both. Regarding the LED strips, you can use the D_LED1 or D_LED2 connector.

Lista di compatibilità: http://it.gigabyte.com/products/page/mb/z390_aorus_pro_wifi#support-cpu

If I were you, I would take one of the latest generation for this board, the 9700k is also cheaper than the 7700k. ;-)

You can use all four slots if you install the appropriate RAMs. In my case I used the Corsair Vengeance LPX and there is plenty of space between the DRP4 and the RAMs.

Please contact customer service directly with any questions about your order and a possible delivery date.

Yes Antenna is included. See manual page 5 Box Contents http://download.gigabyte.eu/FileList/Manual/mb_manual_z390-aorus-pro_wifi_1001_190219_e.pdf

I have only fed the mainboard with DDR4-3000 RAM. In principle, only this type of RAM is compatible. Attention: After installation, the clocking must be changed manually via the BIOS, as less clocking is always defined by default.