Unfortunately, we currently have no information about when the item will be available again and when we will be able to deliver it. The supplier himself is still waiting for a subsequent delivery from the manufacturer and for this reason he had to set the delivery date to unknown. As soon as something changes in this regard, we will post it here. Sorry.
I don't know the article very well, but I found it on the homepage. You may find your answer here on the manufacturer's homepage.
Homepage. https://www.fractal-design.com/de/products/cases/meshify/meshify-c/black/
I hope I could help you a little.
Hello OrCana
From a space point of view it should be possible, you have to remove the front fan from the case.
I have an Asus Prime 570 P MoBo installed with 2 G.Skill Ripjaws V (42 mm), there is still enough air.
Regards
I was able to install an Enermax Liqtech TR4 II 360 without any problems. There is a hard drive holder at the bottom of the enclosure, it has to come out. Then there is enough space at the front of the enclosure for a radiator with three fans.
how long? I have installed an EKWB 360 Radiation in the front and an EKWB pump/reservoir combo in the rear. There's not much air there. Especially the length of the graphics card and the height of the expansion tank must be taken into account! Everything fits for me and I am very satisfied with it.
I would recommend you to use a 240mm AIO and mount it at the top of the case. If you have a slightly longer graphics card, there won't be room for the centre fan with a 360mm AIO.
Which graphics card do you want to install? I assume the radiator is approx. 3 cm and the bracket takes 1 cm = 27.5 cm. So 27.5cm is the maximum length for your graphics card.
If yours is too big, I can recommend the Define R6.
...the community doesn't know that and neither does Digitec. Can also be bought here https://www.aquatuning.ch/gehaeuse-hardware/gehaeuse-zubehoer/23262/fractal-design-meshify-c-white-tg?sPartner=toppreise_ch!
It also depends on which components you want to run with it? Otherwise, any ATX power supply with a maximum length of 175 mm will fit, as it says in the description. Sincerely
Hello dear digitec community :)
I have the following question for which I can't find an answer anywhere: Is it possible to combine the following hardware parts? So does the Kraken X53 AIO fit into the case without blocking the Trident Z RGB sticks on one of the ASUS mainboards?
Partlist:
- Case: Fractal Design Meshify C
- Mainboard: ASUS B550-E / B550-F / B550-A (all have the same RAM slot arrangement)
- RAM: G.Skill Trident Z RGB
- AIO: NZXT Kraken X53
According to the specs of the case, besides a 240mm AIO, only RAM with a height of up to 40mm will fit. However, I have even seen builds with other motherboards and other AIOs where the Trident Z RGB with its 44mm also fits - hence the question.
Kind regards and already a big thank you!
Hello all
I am looking at this case, but I have a few questions about it regarding the compatibility of my existing and future components:
- I have an ASUS ROG Strix Z390-H with a Noctua NH-D15.
- I want to co-figure my ASUS Strix RTX2080 with a PCI-Riser (CableMod Verti PCI-e Bracket).
Now for my questions:
- Does the CPU cooler have room in this case? The information on the case is 17cm (max. height of cooler) and the information on the cooler is 16.5cm (incl. fan). However, are these specifications calculated with the height of the mainboard and the CPU?
- Is there enough room for my RTX2018 with the riser under the cooler? I'm worried that this cooler will come down too far and I won't be able to install the graphics card with the riser.
Thanks in advance for your answers!
Hello, I can tell you how I installed my components. Maybe the comparison will help you. I had the Noctua NH-U12S SE-AM4 (15.80cm) mounted on the AMD Ryzen 5 2600X (AM4, 3.60GHz, 6-Core) which in turn was mounted on an ASUS ROG Strix B450-F Gaming (AM4, AMD B450, ATX). Underneath it had a Gigabyte GeForce GTX 1080 Windforce OC (8GB).
The fan of the CPU is mounted with the wind stream (from front to back and not like the one supplied ).
I think the data given should be understood this way without adding other depths or heights.
In terms of space, you can install a 240 or 280, or even a 360 at the front (then simply without the HD cage), for example from bequiet or Corsair. I have installed two 240 radiators in the case myself, but for a custom loop (one 240 SE from EKWB at the top and one at the front, fans from Corsair). You just have to be careful that, depending on the mainboard and RAM, the radiator can only be installed in the front. The space at the top is very tight for the wheel + fan. In my case, for example, the distance between the RAM sticks and the fan at the top is just half a millimetre.
Rocksresort Laax: win a stay for 4 people
Get involved in the Community and win!
We're giving away a voucher for Rocksresort Laax: 2 nights in a family flat for 4 people.
