Questions about Ergotron LX Dual

Hello Notalda. We are using the monitor arm with 2x Eizo EV2785, 27" screens. Already with these two medium weight screens the mount is not perfect. The weight of the monitors can cause them to sink lower over time. I can therefore only advise against trying it with larger screens. Unfortunately, I cannot confirm whether it would be technically possible...

Hello, As far as I know, the USM tables have a metal rim under the tabletop. I just measured my arm again. If this metal edge is no thicker than 2 cm, and no longer (measured downwards, from the top edge of the tabletop) than 8.5 cm, then the arm with the screw mount will fit. There is also the possibility of fixing the arm with a hole in the tabletop. This is certainly also possible, as long as it does not matter if you drill into the top. Greetings Tim

Please note that the images may actually differ from the original product.

A Samsung 49" 5120x1440 does not make it. But all 34" and also the LG 38" easily manage it. I have not measured the maximum weight

I have equipped the product twice, once with 2x24" and once with 2x27". The larger the displays, the less the installation depth, because the arms are then further apart. You can install the holder in the tabletop and screw it in place, then the table can be mounted on the wall. If you use the normal mounting, there should be about 15-20 cm of space behind the desk for the arms and that you can still move them.

No, unfortunately not. You would have to buy the 2 individual ones from LX Monitor.

Drilling is not necessary. The system comes with a solid screw clamp as part of the base. The foot on the table is approx. 12cm deep and 18cm wide (this would probably be the minimum width for the table). The clamp at the bottom of the table is approx. 5cm deep and 8cm wide and is offset approx. 3cm inwards. So you need 7cm space from the edge at the bottom and 12cm at the top. No tools are needed, the clamp has a good grip. My monitor arm is mounted at the back on the left edge and the IKEA high table motor has no problems with it.

You can fit it without hesitation.

I would take the 27" version. I have exactly this one and with two 27" monitors there is not much room to manoeuvre. I had to buy an extension. Now it fits.

It should not if you position it right. Pull it away of the back edge and I guess your fine :)

According to our research, no.

Hello. According to the manufacturer's website, really only 5kg per arm https://www.ergotron.com/de-de/produkte/produktdetails/45-489#?farbe=Schwarz

Thank you for this information.

Unfortunately, we still don't have any sources that can supply us with the bracket in a timely manner :(

Unfortunately, no delivery date is known at the moment. As soon as we receive more information, we will be happy to adjust this here.

Just discovered it myself in the "Downloads" size tables: 5Kg per monitor.

The requested bracket is only available in silver.