
Electrolux Sta9gw
Electrolux Sta9gw
According to the description and pictures, it should work. We have not used the machines yet, as we will not be moving into our new flat until october.
Please state all dimensions, width (W=xxcm) length (depth) and what goes on top, the foot spacing must be 52cm wide and 42-46 long (depth). laying flat on top is not possible. 59 depth is possible, but 50 width would be very narrow or this adapter would protrude approx. 8cm left and right. (width would be 59cm). If your depth is 50 cm, then it is possible because the rear part protrudes about 10 cm. (The surface is deeper than the machine, and prevents anything from getting jammed in the back when it is mounted up to the wall.
Yes, that fits. I have also fitted the connection kit to a V-Zug Adora washing machine without any problems. The connection kit is an official accessory for the above-mentioned tumbler.
It fits on the 2 standard sizes, you can mount an intermediate piece so that the smaller (depth measured, i.e. door to back) tumble dryer fits on it. If you specify the width and depth in cm, I could look it up.
The feet fit in the top, I would check the dimensions of your machine and compare them with the Elektrolux washing machine, the connection set can be adjusted backwards by approx. 6 cm. (for fastening). For my part, it should work, as the surface dimensions are standardised (except for cheap brands). Open the packaging carefully and if it does not work, send it back.
Connection set is good.
According to my own research, the connection kit is compatible with the specified Bosch washing machine "WAY32741CH" and can therefore be fitted without any problems. :)
7 of 7 questions