Is he still "alive"? That's logical, how is it supposed to recognise the end? It works with a stick-on strip or something similar..... He needs a
physical boundary.
The device also works on frameless glass such as seat glazing, as it intelligently recognises edges with TruEdge technology and does not need frames for orientation. It cleans from a minimum size of 30 x 40 cm and inclinations of up to 45 degrees, with suction cup and safety cable for a secure hold.
I don't think the base station will hold. In this case, it should be secured with the safety cable. However, the robot itself holds very well and has never crashed, even with sloping skylights on the top and bottom.
The scope of delivery includes: 1 W2S Omni window cleaning robot, 1 power supply unit, 1 station, 1 cord with carabiner, 2 microfibre cleaning cloths and 1 cleaning solution (230 ml).
Regarding the question about overhanging use: I'm not entirely sure if the device is suitable for the underside of conservatories. The information available suggests that it is designed for slanted windows, but there is no explicit statement on overhanging installation. I recommend you consult the instruction manual or contact Ecovacs customer service to clarify this specific application.
Differences: W2S OMNI: Premium model with TruEdge edge brushes, stronger spray system, larger water tank (80 ml) and improved navigation for precise corner and frame cleaning. The advanced triple nozzles with wide-angle spray atomisation technology and intelligent WIN-SLAM 4.0 navigation always ensure crystal-clear results Ideal for demanding cleaning tasks.
W2 PRO OMNI: Solid standard cleaning without specialised edge technology. Smaller water tank capacity (60 ml) and simple basic modes.
Recommendation:
W2S OMNI for precise edge cleaning and larger areas.
W2 PRO OMNI for solid basic functions.
This robot cleaner is designed primarily for glass, including windows, glass doors, marble surfaces and tiles, but is not specifically indicated for kitchen unit fronts. It is compatible with glass surfaces of a certain thickness (not less than 3 mm for glass and 4 mm for mirrors) and can clean vertical or inclined surfaces, but use on furniture fronts is not mentioned in the official specifications or available tests. As a result, it is not recommended for use on kitchen unit fronts.
The window cleaning robot is suitable for all window types, including floor-to-ceiling, small, frameless or inclined windows. It has an intelligent climbing system and sensors that ensure stability and safety. However, there is no explicit indication as to whether a 30° slope on one side can be cleaned without any problems. Due to the intelligent sensor system and the ability to avoid obstacles from 4 mm high, it is likely that the robot can cope with a 30° slope, but this is not explicitly confirmed.
In this case, we will refer you to our digitec Assistant, which provides direct contact options so that the problem can be checked and you can be helped accordingly.
https://www.digitec.ch/help
The main difference between the Ecovacs Winbot W2 Omni and the W2 Pro Omni lies in the portable station with integrated battery, two-in-one cable, automatic cable management, and a more robust 12-level protection system. The Pro Omni also boasts a longer battery life and more efficient cleaning with WIN-SLAM 4.0 technology. Essentially, the Pro Omni offers greater flexibility, safety, and cleaning power.
The Winbot W2 Pro Omni includes a portable station with a built-in battery, allowing for cordless cleaning and uninterrupted operation. The Omni station can provide up to 110 minutes of power cable-free cleaning.
The cable from the base station to the robot is 5.5 metres long.
The power cable from the base station is 1 metre long and must always be connected during operation.
I've had that too, but it usually tells you where the problem is... The battery is charged? What certainly doesn't work, but is not documented, charging cable to socket and cleaning >> either - or.
Yes, the detergent tank of the Winbot W2 Omni should be emptied after using the appliance.
This is recommended to prevent the cleaning solution in the tank from ageing or evaporating, which could affect the performance of the appliance. In addition, the tank should be rinsed out with a little water, especially if cleaning solution is used, to remove any remaining solution and keep the tank clean.
The pad of the Winbot W2 Omni should not be washed in the washing machine at 60 degrees. The microfibre cloths used with the device should be hand washed or cleaned at a lower temperature to maintain their quality and lifespan.