Questions about Ecovacs T20 Omni

So, the small dust brush, the dust bag for the robot and station, the main brush and of course the small dust pre-filters. Cleaning fluid, cleaning plates. These are utensils

Yes, if the task has not been completed. Does not have to be 100% the same place. The path optimisation may suggest a slightly different location. But the area that has been started will continue to be cleaned 100% automatically after the pads and dust have been cleaned

You can find the entire range of hoover accessories from the Ecovacs🫡 brand at the following link: https://www.galaxus.ch/de...

I have touched the water in the tank and it is 100% not 55 degrees. The 55 degrees refers to the "hot air drying of the wipes. I don't understand "Do I also have to switch on the station?". There is probably a typo. There are 2 water tanks in the station. A dirty water tank and a clear water tank. Both have to be emptied from time to time. The robot supplies itself with fresh water in the station and also empties the protective water in the station. You don't have to worry about anything

The Ecovacs DEEBOT T20 OMNI robot hoover can clear thresholds up to 2 cm high. However, it is important to note that the clearance height may be affected by the angle at which you approach the threshold, the shape of the threshold and the presence of debris on the threshold. If you have thresholds higher than 2 cm, you may need to abrade them or cover them with carpet so that the robot hoover can cross them.