CHF747.58
Dreame X40 Ultra Complete
12000 Pa, Wiping pads (rotating)
Questions about Dreame X40 Ultra Complete
What would you like to know?
0 questions and answers
The price is determined by various influences, such as the purchasing conditions specified by the supplier. For this reason, there may be price differences between dealers. We always try to offer a price in line with the market, but this is not possible for all products.
Helpful answer
This product is an external offer (see: Offer from: SG Elektronik AG). Unfortunately, we have no influence on the pricing in this case.
Helpful answer
There is a sensor that recognises whether the bag is installed. This must receive sufficient pressure.
Given the general quality of this appliance, I would hardly be surprised if something was faulty.
Mine is being repaired for the third time. The previous one had to be completely replaced
Wasn't included with me back then
digitec
4 months ago
Helpful answer
Yes, the model is suitable for long-haired animals thanks to the TriCut anti-tangle rotating brush that prevents clogging and effectively captures hair. The powerful 12,000 Pa suction quickly removes pet hair and debris with fewer passes. However, it is important to know that there is a separately available cutter blade brush option, which may not be ideal if you have carpets with long fringes, as it could damage them.
Automatically generated from the .
Helpful answer
Rather not. 2cm is possible, but not always the first time. I very much doubt that almost double that is possible. According to the manufacturer, only up to 22mm is possible. At 3.5cm you have to use the X50. According to the manufacturer, it should be able to do 4.2cm and up to 6cm with a double step.
Helpful answer
You would have to report this directly via our Galaxus Assistant so that it can be checked. https://www.galaxus.ch/help
Helpful answer
I hardly notice that my X40 is working in the background, whether I'm working or watching TV. I love my X40.
With the Dreame X40 Ultra Complete, you can activate room maps and images directly in the Dreame Home app. Procedure:
- Open the app and select the X40.
- Tap on "Manage map" → there you can switch on 3D view or map display with furniture.
- If no map is available yet: Start the first complete cleaning or mapping run.
- Under Map settings → Activate "Room images / 3D map".
This will display the rooms as 3D visualisations instead of real photos. Real camera images are not provided with the X40, it uses LiDAR + 3D sensor technology.
digitec
6 months ago
Helpful answer
The dust bags that are suitable for the Dreame X40 Ultra are compatible with models such as the L10s Ultra, L20 Ultra, X30 Ultra and X40 Ultra. The Dreame dust bags with 3 litre volume for L10s Ultra that you linked are therefore also suitable for the X40 Ultra. These bags are specially developed for the suction station of the robot hoovers in this series and ensure reliable dust collection.
Automatically generated from the .
According to our information, this model does not manage 3 cm, but there is another model from Dreame that should be able to do this: https://www.galaxus.at/de/s2/product/dreame-x50-ultra-complete-saugwischroboter-staubsauger-roboter-53898301.
No
digitec
8 months ago
The device only requires Wi-Fi during installation to establish the connection and activate smart functions. After that, it can be operated without Wi-Fi as long as remote control is not required. A hotspot via mobile is sufficient for installation, as the device only supports 2.4 GHz Wi-Fi.
Automatically generated from the .digitec
8 months ago
Helpful answer
The robot hoover does not need to be connected to a water supply to operate. It has a removable water tank that can be filled manually, and is equipped with an automatic water filling system for mop cleaning. However, it does not require a permanent connection to a water supply for its main operations.
Automatically generated from the .
Helpful answer
We have been using the x40 with the microfibre Mobpads on oiled parquet flooring since the release, no problems or micro-scratches, I think the contact pressure is too low.
Helpful answer
The base station is 34 cm wide
Please report your concern via our Digitec Assistant so that we can check this and find a satisfactory solution together with you. https://www.digitec.ch/help
- Is there something stuck in the "suction shaft"? Remove the roller and check.
After sucking in a Nerf cartridge, it also stopped in my case.
- Cleaned all sensors?
- If nothing helps - reset and have a new map created
It's best to vacuum first and then mop. That's what I always do.
digitec
10 months ago
The robot automatically recognises carpets and increases its suction power to up to 12,000 Pa, which enables very thorough cleaning. It vacuums carpets with high efficiency, picking up over 81 g of dirt on carpets in tests, which is considered very impressive. It also lifts its mops and side brushes on carpets to prevent tangling in the fibres. The extendable side brush also supports cleaning on edges and corners, with particularly good performance on carpets. Overall, the robot is very suitable for households with many carpets and delivers convincing cleaning results.
Automatically generated from the .
digitec
11 months ago
The Dreame X40 Ultra Complete has advanced carpet detection, which enables it to automatically increase the suction power when it moves onto a carpet. For low pile carpets, the robot lifts its mops to keep them dry. For carpets with a higher pile, the robot can dismantle the mops in the station to protect them from getting wet. This improves the handling of carpets compared to previous models, which may have struggled to drive on carpets and get stuck.
Automatically generated from the .
digitec
12 months ago
This robot hoover is equipped with a number of advanced cleaning features. It has retractable side brushes, an obstacle detector and a programmable zone cleaning function. The robot is also capable of detecting carpets and automatically separating the wiping pad to avoid getting carpets wet. The base station provides automatic dust emptying and self-cleaning of the wiping pads. For stubborn stains, it can use stain detection to intensify cleaning.
When it comes to cleaning products, we recommend using solutions that are compatible with the automatic detergent addition system. However, specific details of recommended cleaning products are not available in the information provided. It is advisable to consult the product manual or the manufacturer's official website for precise recommendations.
Automatically generated from the .
Hello
The detergent is only used for washing the mops inside the station.
The water that the Dreame X40 uses in wet mode is the clear water from the large tank.
Kind regards
A pH-neutral cleaner such as Frosch Neutral Cleaner, Kiehl Veriprop or Dr. Schutz PU Cleaner (mild dosage) is suitable for Dreame on exposed anhydrite floors. Alternatively: 5 litres of water + 1-2 drops of detergent.
Important: Only mop with a damp cloth, do not use aggressive cleaners or too much water.
The instructions state that only products sold and tested by Dreame should be used to prevent damage. I'm afraid this could damage the device. After that, the product is not to be put in the water that the Dreme uses, but in the product tank provided for this purpose. It will then be used to wash the mops.
Helpful answer
Our consumption is at least very manageable. After 6 months of daily use, the 1 litre bottle still contains 250 ml for the 80 m2. However, none of it was ever poured directly into the water tank. As I interpret the ingredients, it mainly contains water and alcohols. You may want to compare the ingredients of other detergent manufacturers.
digitec
1 year ago
Yes, the Dreame X40 Ultra Complete swings the mop out to clean hard-to-reach areas. The mops can swivel outwards by up to 4 cm, thanks to the "RoboSwing" feature, to get under low furniture and into corners.
Automatically generated from the .
The Dreame X40 has a large number of setting options regarding the amount of water to be used, the intensity of cleaning and the sequence (e.g. vacuuming before mopping). I think it will also work on a biopolymer cast floor. I mainly use it myself on slate floors and a few carpets. It recognises the difference and adjusts the cleaning automatically (e.g. only vacuuming on carpet).
30 of 92 questions