CHF83.90
Corsair Vengeance RGB Pro
2 x 8GB, 3600 MHz, DDR4-RAM, DIMM
Questions about Corsair Vengeance RGB Pro
What would you like to know?
0 questions and answers
Helpful answer
In general, you have a slightly better performance with 4x instead of 2x (not much, 1-3 FPS more), because the full potential is used (four memory banks). So I would (if the price is similar, I don't know exactly now) rather take the 4x8 GB.
Helpful answer
...no is not compatible, other XMP and other clock and CL and Volt.
Helpful answer
According to ASUS: 4 x DIMM, Max. 64GB, 3200MHz(O.C.) From my point of view, they fit.
Yes (by the way, an MSI H410M-A PRO is installed).
Helpful answer
Yes, in my opinion it should work in principle, but it is not ideal. In exceptional cases, it could also go completely wrong. If possible, I would use the same RAMs. By the way, the bars are really good - they deliver what they promise. I wrote above that the RAMs in my board (Asrock B550M Steel Legend) don't quite manage 3600. With a new firmware of the motherboard, 3600 is now also possible with the specified XMP profile.
Helpful answer
Exactly, it's 32 GB total.
What?
Hello Although it is not on the list of compatible motherboards, I would cautiously say yes, as quite a few b450 models with AMD are compatible with the Vengance Pro RGB. I have a MSI Intel Z390 Gaming Pro with 4 x 32GB and it runs great. However... it is possible that they run under your mainboard but the XMP profile can not be activated or similar. I hope this was able to help you.
Helpful answer
I found out. It was a setting in the bios :-).
Helpful answer
Yes I agree, CMW16GX4M2C3000C15 are 2x8GB !!!
digitec
4 months ago
Helpful answer
The speed of the Corsair Vengeance RGB Pro 2 x 16GB DDR4 RAM kit is 3200 MHz with a CAS latency of 16 and a voltage of 1.35 V. The «0 MHz» shown is likely a placeholder or error; the actual tested speed is 3200 MT/s, which corresponds to 3200 MHz effective frequency, supported by XMP 2.0 profiles for easy configuration in BIOS. This is consistent with Corsair's specifications for this series of memory modules.
Automatically generated from the .
DDR4 2x16GB | 32GB 3200MHz 16-20-20-38 1.35V
Helpful answer
In this case, we will refer you to our Galaxus Assistant, which provides direct contact options so that you can be helped accordingly. https://www.galaxus.de/help
Yes
We receive this bundle from a different supplier to the smaller ones. Due to our comparatively high purchasing conditions, the final price is correspondingly higher.
Helpful answer
It depends from the Mainboard Model.
This model is 50.8mm high while the SL version is not so old and has a height of 44mm.
Helpful answer
Hi, the extra 32 GB doesn't help much in my opinion. In any case, a new graphics card brings a lot and the jump from 3060 to 3060ti or better 4070ti is huge
Hello, You can find the list of compatible RAM for your motherboard below: https://rog.asus.com/motherboards/rog-maximus/rog-maximus-xiii-hero-model/helpdesk_qvl_memory/ Unfortunately, the selected RAM is not listed as compatible by the manufacturer. However, you can find a compatible RAM for your motherboard below: Corsair GB, DDR4 CL16 (4 x 32GB, 3200 MHz, DDR4-RAM, DIMM) Yours sincerely
Have you looked in the manual of the mainboard to see which two slots are to be used for only two RAM bars? Normally, these are slots 2 and 4, counting from the CPU socket. And do you have your monitor connected to the mainboard or to the graphics card? Does the monitor have power and is it switched on?
30 of 191 questions