
Corsair Vengeance LPX
2 x 16GB, 0.00 MHz, DDR4-RAM, DIMM
Corsair Vengeance LPX
2 x 16GB, 0.00 MHz, DDR4-RAM, DIMM
The DIMMs are Dual Rank
Hello Josh, No, you don't have to set anything. The only important thing is the dual channel (if you look at the RAM slots, it is always 1+3 and 2+4 with 4 slots). But since you buy 2 additional slots, this is done automatically anyway, you don't have to set anything unless you want to overclock the RAM (voltage etc.).
Yes, I have always had good experiences with Corsair Vengeance RAM on Ryzen systems :)
It is another supplier, we can't obtain the product for the price of 119chf at the moment.
Hello, Yes, it works, it's on the list. CORSAIR CMK64GX4M4B3600C18 ver4.31 64GB(16GB*4) DS 18-19-19-39 1.35V http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/MAXIMUS_IX_EXTREME/Z270_ROG_QVL.pdf https://www.asus.com/ch-de/Motherboards/ROG-MAXIMUS-IX-FORMULA/HelpDesk_QVL/
Servus. I would choose 2 slots with 32 GB each. Then you still have the option to upgrade to 128 GB with an additional 2 x 32 GB. Greetings from Bavaria
guggst du hier: https://www.msi.com/Motherboard/support/B450M-PRO-VDH-PLUS#support-mem-14
yes, these fit. but you have to activate xmp in uefi.
No. You need DDR3 RAM and not DDR4 RAM. Please check the specifications of your mainboard. -> https://www.asus.com/ch-de/Motherboards/H87ME/specifications/ -> DDR3 1600/1333/1066 MHz. For example the following product: HyperX Fury (2x, 8GB, DDR3-1600, DIMM 240)
Unfortunately, there is no information on this from the manufacturer. The only information that is usually written on the RAM is the voltage, which is 1.20V for this product.
What do you think you can achieve with 4000 and co. if your CPU is only designed for up to 2666 Mhz? It won't be any more, you can put whatever you want into it.
it's quite unlikely. they are for desktop pc-s, they are quite big with heatsinks. laptops need much smaller ram modules. i think it should be possible to filter the results for laptop rams.
dmidecode sagt Single Rank, passt zur Width von 64 bit. Handle 0x003D, DMI type 17, 92 bytes Memory Device Array Handle: 0x0034 Error Information Handle: 0x003C Total Width: 64 bits Data Width: 64 bits Size: 16 GB Form Factor: DIMM Set: None Locator: DIMM_A2 Bank Locator: BANK 1 Type: DDR4 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 2133 MT/s Manufacturer: Corsair Serial Number: 00000000 Asset Tag: Not Specified Part Number: CMK32GX4M2E3200C16 Rank: 1 Configured Memory Speed: 2133 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Memory Technology: DRAM Memory Operating Mode Capability: Volatile memory Firmware Version: Unknown Module Manufacturer ID: Bank 3, Hex 0x9E Module Product ID: Unknown Memory Subsystem Controller Manufacturer ID: Unknown Memory Subsystem Controller Product ID: Unknown Non-Volatile Size: None Volatile Size: 16 GB Cache Size: None Logical Size: None
No, this is DDR4 RAM and that motherboard is only compatible with DDR5.
yes,but why so weak ram...you could go up to ddr4-5000 oc with this board...here more infos about the board...https://www.asus.com/ch-de/motherboards-components/motherboards/tuf-gaming/tuf-gaming-b560-plus-wifi/
Unfortunately, we have no additional information. The stock is probably mixed up. In case of matching bar codes, our logistics considers different versions as the same one.
Hello, I don't know. Sorry
Yes, right. Mine's warranty expires in 2052.
According to the MSI homepage, the board is not. It is also important to mention XMP speed support may be limited when using a non-K CPU Hope this helps. Otherwise, always check with the board manufacturer which RAM is supported.
Unfortunately, it is not possible to tell the RAM version exactly. The suppliers logistics-team can not separate them, due to matching bar codes.
The memory kit has a height of 34mm and is compatible with the MSI MEG X570 Unify motherboard and the AMD Ryzen 7 5800X, but the motherboard needs an upgrade to work with the CPU.
Unfortunately, we do not have the exact version information. We have different sources of supply here and the version can be different depending on the order. However, I would like to thank you for your advice and hope that we will optimise this process in the future to better distinguish between the individual versions.
30 of 172 questions