CHF915.–
Corsair D596GB 5600-40 Vengeance RGB bk K2 COR
2 x 48GB, 5600 MHz, DDR5 RAM, DIMM
Questions about Corsair D596GB 5600-40 Vengeance RGB bk K2 COR
What would you like to know?
0 questions and answers
The Corsair Vengeance with the manufacturer number CMK32GX5M2E6000Z36 has a memory clock frequency of 6000 MHz.
Many thanks for the tip! It seems that the value has already been adjusted in the meantime.
digitec
1 year ago
Corsair Vengeance RAM (2 x 16GB, 6000 MHz, DDR5 RAM, DIMM) has no RGB bands. These memory modules are designed for performance and reliability, but they do not feature RGB lighting.
Automatically generated from the .
Amd is a cpu brand, exactly. However, this ram model was specialised for the amd cpus so that if you own one, you can also extract the best performance from the ram, so to speak. A compatibility check would have to be done. You can simply type your mainboard into a browser and open the official page and from there everything should be self-explanatory. In other words, it could theoretically work with an intel cpu, but not at full power. If you are looking for full performance, look for the same model or similar models that are "intel xmp ready". If you have any further questions, just reply to me.
2x 16Go
The manufacturer number is: CMK192GX5M4B5200C38
Yes
digitec
2 months ago
Yes, this DDR5 RAM with 6000 MHz and XMP certification is compatible with the ASUS TUF GAMING Z790-PLUS WIFI. The Z790 board supports DDR5 memory with XMP profiles above 6000 MHz as described in Corsair's compatibility guide. Check the QVL list from ASUS for the exact SKU CMK64GX5M2B6000C40W as not all kits are explicitly tested, but similar configurations will work reliably.
Automatically generated from the .
We work with different suppliers and daily prices. For this reason, the price of an item may be adjusted upwards or downwards over time.
Unfortunately, RAM prices are currently rising dramatically due to memory shortages. You can find more information in this magazine article: https://www.digitec.ch/de...
Brudi we work with daily prices, which can be influenced by various factors such as purchasing conditions, stock levels and supply and demand.
This article explains why RAM prices are currently rising: https://www.digitec.ch/de...
According to my research, the difference is as follows:
These are CL30, black, for Intel XMP:
- Corsair Vengeance (2 x 16GB, 6000 MHz, DDR5-RAM, DIMM)
These here are CL28, grey, and suitable for AMD EXPO & Intel XMP:
- Corsair DDR5, 6000MT/s 32GB 2x16GB DIMM, Unbuffered, 28-36-36-96, Std PMIC, AMD EXPO & Intel XMP, VENGEANCE (2 x 16GB, 6000 MHz, DDR5-RAM, DIMM)
so with an AMD processor the grey ones would be recommended:
Corsair DDR5, 6000MT/s 32GB 2x16GB DIMM, Unbuffered, 28-36-36-96, Std PMIC, AMD EXPO & Intel XMP, VENGEANCE (2 x 16GB, 6000 MHz, DDR5-RAM, DIMM)
digitec
7 months ago
Helpful answer
The height of the Corsair Vengeance RGB DDR5 RAM modules with 6400 MHz and CAS latency 32 is typically around 44 mm. The be quiet! Dark Rock Pro 5 CPU fan is one of the larger coolers on the market with a height of approx. 162.8 mm. The MSI MAG X870 Tomahawk WIFI is an ATX mainboard with the RAM slots directly under the CPU socket.
Due to the height of the Dark Rock Pro 5, it is very likely that the RAM modules will not simply fit under the mounted fan. In practice, the CPU fan usually has to be removed in order to install or replace the RAM modules safely and correctly, as the cooler protrudes over the RAM slots and blocks access.
To summarise: You must remove the be quiet! Dark Rock Pro 5 CPU fan in order to install or replace the Corsair Vengeance RGB DDR5 RAM modules on the MSI MAG X870 Tomahawk WIFI motherboard. Installation under the mounted fan is not possible due to the height.
Automatically generated from the .digitec
8 months ago
Helpful answer
The certification is XMP 3.0 because DDR5 memory modules, including this one, use the XMP 3.0 standard for preconfigured performance profiles. Corsair supports both Intel XMP and AMD EXPO profiles on their DDR5 RAM, allowing compatibility with both platforms, but the underlying certification standard for DDR5 is XMP 3.0.
Automatically generated from the .digitec
8 months ago
Helpful answer
Yes, these are indeed the modules with the manufacturer product ID CMH96GX5M2E6000Z36. These DDR5 RAM modules have a memory capacity of 2 x 48 GB, a clock frequency of 6000 MHz, CAS latency 36 and support both AMD EXPO and Intel XMP 3.0 profiles at 1.40 V voltage.
They work with AM5 platforms without any problems, as they are listed on the QVL (Qualified Vendor List) for AM5 mainboards and specifically support AMD EXPO, which is optimised for AMD Ryzen processors with AM5 sockets. Compatibility is therefore guaranteed.
Automatically generated from the .
Helpful answer
Hi, I have installed it in the DXP 8800Plus. Runs like hell...
Pictures are for illustrative purposes only. :)
Hello,
We have not tested these RAMs with the configuration mentioned. However, according to the Asus QVL list for your motherboard, it is possible to pair RAM with a maximum frequency of 8000 MHz with the 14900KF but not this Corsair model according to their list.
This model would be suitable: G.Skill Trident Z5 RGB (2 x 24GB, 8000 MHz, DDR5 RAM, DIMM)
Here's the link to the list (you need to select 14th Gen Intel in the filter): https://rog.asus.com/ch-fr...
Helpful answer
Hello,
The frequency is 6000Mhz. We've updated the information.
In this case, we will refer you to our digitec Assistant, which provides direct contact options so that you can be helped accordingly.
https://www.digitec.ch/help
Yes, the Corsair Vengeance DDR5 RAM module (CMK32GX5M2E6000Z36) is equipped with a heatsink. The heatsink is permanently attached and is not intended to be removed.
Helpful answer
I was able to do a search and yes, the RAMs are compatible with both the CPU and the motherboard.
Helpful answer
Unfortunately, the manufacturer does not provide any details.
Hello,
It is indeed DDR5/DIMM. However, it's 2 x 16 GB and not 2 x 32 GB. We'll adjust this as soon as possible!
Former employee
1 year ago
As these are used items, we often can no longer get a full warranty through to the service centres concerned and this has therefore been stipulated.
However, the input is certainly justified and certainly has an impact on the used offers. We are currently discussing a change to this with our partners.
digitec
1 year ago
I'm not entirely sure if the specific RAM model "Vengeance RGB (2 x 16GB, 5200 MHz, DDR5 RAM, DIMM)" is compatible with ASUS Aura Sync. However, it is known that some Corsair RAM models, such as the Vengeance RGB Pro and Dominator Platinum RGB, are compatible with Aura Sync via a specific plug-in. To confirm the compatibility of your model, I recommend checking the official information on Corsair's website or contacting their technical support.
Automatically generated from the .30 of 102 questions