Moin Mosi13, should actually fit. I assume that the new RTX 3000 series has not received any special connectors.
The prerequisite is the correct power supply.
Ich weiss zwar nicht genau was du meinst, aber vielleicht hilt dir das weiter: Corsair Premium Individually Sleeved 12+4pin PCIe Gen 5 12VHPWR 600W cable, Type 4, WHITE
No does not fit together. The cables for power supplies from Corsair.
The cables must match the power supply unit. The plugs on the side of the mainboard and the devices are standardised. The plugs on the side of the power supply unit, however, are not. Every manufacturer does something a little different.
It is best if you check the compatibility table on cablemod website:
https://cablemod.com/compatibility/
(I think the difference is black label rm850x or yellow label rm850x, but check to be sure)
If still in doubt, contact their upport - they should be able to clear it for you.
Basically, all CableMod C-Series (C-Series stands for Corsair compatible) can be used. The name also says RMi, RMx, and the power supply you are looking for is an RMx, which means it is 100% compatible.
Here are the contents with the length of each cable:
- 1 ATX 24-pin cable (600 mm)
- 1 x 8-pin EPS cable (750 mm)
- 1 x 4+4 pin EPS cable (750mm)
- 2 x 8-pin PCI-e cable (600mm)
- 1 x 6-pin PCI-e cable (600mm)
- 1 x Quad SATA cable (850mm)
- 1 x Dual SATA cable (500mm)
- 1 x dual Molex cable (500 mm)
- 2 x 8-pin hybrid cable combs
- 2 x 4-pin hybrid cable combs
Salü
No the set does not really fit. Suitable for a GPU with X3 8-PIN PCI-E power connectors.
But for your MB it fits => it has a 4+4 and 8-PIN EPS cable.
It only has two 8-PIN PCI-E and one 6-PIN PCI-E. => You can, however, operate the GPU with two 8-PIN cables or with two 8-PIN and one 6-PIN.
Link to the exact description.
https://cablemod.com/product/cablemod-pro-modmesh-c-series-rmi-rmx-cable-kit-red/
Gruäs
niflheim
I don't think this kit will fit the Straight Power 11. CPU and motherboard cables might work. Standard Molex connectors as offered with your power supply will not fit. I suspect the Extenstion Kit (https://www.digitec.ch/de/order/36317234) might fit better, as you can make your original motherboard, PCIe and CPU cables look nice with these extensions.
Hi,
I can't tell you exactly why it's like that, but I think that's the case for everyone, isn't it? I have this Corsair power supply:
Corsair RM850x *2018* (850W)
And the CableMod cable definitely fits in there. The different wattage models are all the same in terms of the connections. I have connected it to an ASUS RTX 2080TI.
ASUS GeForce RTX 2080 Ti ROG STRIX O11G (11GB, High End)
I hope I could help you.
Have a nice weekend :)
The C-Series are only compatible with Corsair... the RT-Series sets are meant for the Asus Thor....
CableMod RT-Series PRO Kit
Or search for "Cablemod RT" in the search function 😀