CHF105.–
CableMod C-Series PRO Kit RMi,RMx
65 cm
Questions about CableMod C-Series PRO Kit RMi,RMx
What would you like to know?
0 questions and answers
Thank you very much for the advice and the effort! We will have this adjusted immediately.
Can anyone tell me if the cables are compatible with an
Asus Strix Z490-F and Auros RTX 3070 Master?
Moin Mosi13, should actually fit. I assume that the new RTX 3000 series has not received any special connectors.
The prerequisite is the correct power supply.
RMx kit for RMx power supply, so it should be compatible without any problems yes.
Helpful answer
Ich weiss zwar nicht genau was du meinst, aber vielleicht hilt dir das weiter: Corsair Premium Individually Sleeved 12+4pin PCIe Gen 5 12VHPWR 600W cable, Type 4, WHITE
According to the description, no 12VHPWR cable is included
No does not fit together. The cables for power supplies from Corsair.
The cables must match the power supply unit. The plugs on the side of the mainboard and the devices are standardised. The plugs on the side of the power supply unit, however, are not. Every manufacturer does something a little different.
Helpful answer
It is best if you check the compatibility table on cablemod website:
https://cablemod.com/compatibil...
(I think the difference is black label rm850x or yellow label rm850x, but check to be sure)
If still in doubt, contact their upport - they should be able to clear it for you.
Basically, all CableMod C-Series (C-Series stands for Corsair compatible) can be used. The name also says RMi, RMx, and the power supply you are looking for is an RMx, which means it is 100% compatible.
Du hast volle Einsicht was wo passt in der Compatiblity list: https://cablemod.com/compatibil...
I don't follow exactly what you mean, but I assume you are aiming at the Sense pins, see this picture: https://i.stack.imgur.com/Spsgx.png
Former employee
5 years ago
Here are the contents with the length of each cable:
- 1 ATX 24-pin cable (600 mm)
- 1 x 8-pin EPS cable (750 mm)
- 1 x 4+4 pin EPS cable (750mm)
- 2 x 8-pin PCI-e cable (600mm)
- 1 x 6-pin PCI-e cable (600mm)
- 1 x Quad SATA cable (850mm)
- 1 x Dual SATA cable (500mm)
- 1 x dual Molex cable (500 mm)
- 2 x 8-pin hybrid cable combs
- 2 x 4-pin hybrid cable combs
Salü
No the set does not really fit. Suitable for a GPU with X3 8-PIN PCI-E power connectors.
But for your MB it fits => it has a 4+4 and 8-PIN EPS cable.
It only has two 8-PIN PCI-E and one 6-PIN PCI-E. => You can, however, operate the GPU with two 8-PIN cables or with two 8-PIN and one 6-PIN.
Link to the exact description.
https://cablemod.com/product...
Gruäs
niflheim
I don't think this kit will fit the Straight Power 11. CPU and motherboard cables might work. Standard Molex connectors as offered with your power supply will not fit. I suspect the Extenstion Kit (https://www.digitec.ch/de...) might fit better, as you can make your original motherboard, PCIe and CPU cables look nice with these extensions.
Helpful answer
I think you mean the RM1000x. In this case the cable kit fits (all RMx are supported).
Yes, that fits.
Helpful answer
The black and white ones came in high-gloss white, so it's very likely that the white ones will too.
It's best to check the cablemod manufacturer's page to see which cablemod fits. According to digitec, this cablemod fits rm hx and sf series.
Hi,
I can't tell you exactly why it's like that, but I think that's the case for everyone, isn't it? I have this Corsair power supply:
Corsair RM850x *2018* (850W)
And the CableMod cable definitely fits in there. The different wattage models are all the same in terms of the connections. I have connected it to an ASUS RTX 2080TI.
ASUS GeForce RTX 2080 Ti ROG STRIX O11G (11GB, High End)
I hope I could help you.
Have a nice weekend :)
The C-Series are only compatible with Corsair... the RT-Series sets are meant for the Asus Thor....
CableMod RT-Series PRO Kit
Or search for "Cablemod RT" in the search function 😀
Unfortunately not. Only 2x 8-Slot- & 2x 4-Slot cable combs are included.
Helpful answer
CableMod C-Series PRO Kit AXI,HXI ,this is the product line that is matched to the RM power supplies.
Helpful answer
Nope it would not be compatible. The C-Series Kits are only compatible with Corsair PSU's.
No. The cables are only compatible with certain power supplies. See product page -> Specifications -> Show more -> Compatible power supply unit
Helpful answer
According to the specification, these are intended for the corsair brand.
look here:
https://cablemod.com/compatibil...
Helpful answer
If you mean the RM1000x, then yes.
30 of 33 questions