Questions about ASUS ROG Strix Z490-G Gaming (Wi-Fi)

jwjwjw1

3 years ago

For some time now, I have been having a problem with DisplayPort. I am using two displays, one connected with HDMI, the other with DisplayPort. The display connected with a DisplayPort cable keeps flickering. I have tried resetting my PC, updating the latest BIOS version, removing the power cable from the display for a while to reset it, updating the monitor drivers and the graphics card, nothing works. Do you have any idea? Also, the graphics card (built into this motherboard) is INTEL (R) UHD Graphics 630. Thank you in advance for your suggestions for resolution.

1 answer

Minastiriel

3 years ago

Your display port cable is badly plugged or just dead in my opinion

LLT41

3 years ago

Does the board also run an i5-11th GEN (e.g. Intel Core i5-11600K)?

1 answer

gschwinds

3 years ago

https://rog.asus.com/ch-de/motherboards/rog-strix/rog-strix-z490-g-gaming-wi-fi-model/helpdesk_cpu

Anonymous

4 years ago

I would like to convert my "old" gaming PC from ATX to mATX, and this case in the picture still has a wifi antenna, but I can't find it in the scope of delivery, is it included or not? And can I connect my ASUS GeForce GTX 1070 STRIX O8G GAMING (8GB) and the processor Intel Core i5 6600K BOX (LGA 1151, 3.50GHz, 4-Core)?

1 answer

gschwinds

4 years ago

Since the socket of the mainboard (LGA 1200) alone does not match that of the CPU (LGA 1151), all other questions are invalid. Not taken into account? You mention it specifically with the CPU... You will have a hard time buying a new board for an i5 6600K. The CPU is over 5 years old and hasn't been sold for about 2 years. If you really want to upgrade, look for used ones on Ricardo, Tutti, etc. Note: Each manufacturer provides a list of supported CPUs for each mainboard. For this one it would be https://rog.asus.com/ch-de/motherboards/rog-strix/rog-strix-z490-g-gaming-wi-fi-model/helpdesk_cpu You can find this out with a search engine within 1min.

JHofer.

4 years ago

will a 2080ti fit on the MB ?

2 answers

derschlumpf74

4 years ago

Helpful answer

ja

KingSwizzly

4 years ago

Is there a mATX from ASUS with 4 RAM slots, M.2 NVMe interface and AM4 socket? Anyone have an idea?

1 answer

elmatador

4 years ago

As far as I know, all Gen3 MBs have an M.2 connector. https://www.digitec.ch/de/s1/producttype/mainboard-65?bra=1&pdo=1120-8657%3A261%7C1120-12%3A332514%7C12-746%3A478919&tagIds=76

werberger

5 years ago

For this mainboard, there is 1x EATX12V_1 with 8 pin connector and 1x EATX12V_2 12V with 4 pin connector for the CPU supply. I have not found a new PC power supply at Digitec that meets this requirement. Most of them have only 4+4-pin 12V 1x and unfortunately not 2x or 3x 4 pin. Please clarify how I should handle this!

1 answer

gschwinds

5 years ago

I recommend taking a look at the manual for the mainboard. This could clarify things https://dlcdnets.asus.com/pub/ASUS/mb/LGA1200/ROG_STRIX_Z490-G_GAMING/G16475_ROG_STRIX_Z490-G_GAMING_UM_V2_WEB.pdf Chapter 2.1.6 ATX power supply page 2-9 or 43 ok?!