Questions about Arctic Z2 Basic

Yes

Yes, this is possible, but it depends on the installed monitor size. If you go to the maximum size, the range of movement is limited.

Yes, this is possible without any problems. You can rotate the mount (with the monitor), so you can switch relatively quickly between horizontal and vertical alignment!

Yes, I have attached two Dell U2719Ds to it myself. But it's not a wall mount, it's a table mount. It cannot be mounted on the wall.

Yes, that is quite possible. I also use this combination. Two 27" is also possible, but then you can no longer adjust the angle well.

Hello! Yes, you can! That's what I did as a temporary solution. And when the monitor is suspended, you don't see that a second arm belongs to it.

Hello, unfortunately this will not work. According to my measurement, a maximum of 6 cm is permissible. Kind regards

The maximum weight is 16kg (as indicated on the packaging). You can attach a monitor weighing a maximum of 8kg to each arm. https://www.arctic.ac/ch_de/z2-basic.html

Hello Vaelu041 I use this holder with two 27" on an Ikea Linnmon plate. It has lasted me for a year :)

This works, but the rotation of 2x 28" displays is slightly restricted if you have them very close to each other. But with distance it still works!

Unfortunately, the information on our site is incorrect, the product is actually suitable for a screen size of 25". We apologise for any inconvenience caused. You are welcome to contact our customer service if you would like to return the product and need support or help. https://helpcenter.galaxus.ch/hc/de/requests/new

From the table top to the top is a good 40 cm

Yes it is possible

Hoi and as a rule yes, there is mounting material included.

Hello Wall-E-4614, on the table the top is 7cm deep, 6cm wide and on the underside 6cm deep, max. thickness of the table top may be approx. 7cm.

Theoretically, I guess so, but I wouldn't recommend it. Let it hang "empty" or "free" until you have a second monitor.

Bis max. 60mm

Hello, No, that's not possible. If the screen holder is at the top of the bar, I only have about 19 cm to the desk under the 24'' monitors.

Depends on the weight of the monitors. I had two Dell U2415s, each weighing about 4.2 kg, mounted without a base. Basically, the construction withstood it, but the ball joint did not. The monitors always automatically tilted slightly downwards.

Hello, the stand is for two 27 inch screens (about 68.6 cm diagonal) and can be fixed on a table with a maximum thickness of 6 cm.

Size of base on table is 60mm x 60mm, metal approx. 5mm thick. Screw is under table. Can have it to rear of table by a wall, or at any point along the edge of the table.

I have installed 2x 27" monitors. If the edge of the monitors is not thick, it will also work with 2x 28". I still have room to move the arms a little apart.

The whole construction (stand, arms, mounting) is quite massive. Therefore, a difference of 3 kg should not be a problem. The instructions (https://support.arctic.ac/index.php?p=z2-basic) only say that max. 8kg per arm should be attached.

I have not found any accessories for it. I don't think it has an extension. Dad with the adjustment is really not that great.

I think so