Questions about Apple TV 4K (3rd Gen) + Ethernet

Same thing with me. I have now ordered it from Apple itself. It will arrive next week.

Yes, I've also seen that the price has gone up an outrageous 80 francs... unbelievable, and they think we don't notice it...

Here are some possible explanations and suggested solutions: Check HDMI cable: Make sure that the HDMI cable connecting the Apple TV Box to your Panasonic TV is in good condition. A damaged cable can lead to signal loss. Screen refresh rate: Check the settings on your Panasonic TV and make sure that the screen refresh rate is set correctly. Some TVs offer different modes with different refresh rates. HDR settings: If your TV and the content support HDR (High Dynamic Range), check the HDR settings on the Apple TV Box. Sometimes HDR compatibility issues can lead to unexpected screen changes. Software updates: Check that both your Panasonic TV and Apple TV Box have the latest firmware or software updates installed. Updated software may resolve known issues. Cables and connections: Ensure that all cables are firmly and correctly connected. If necessary, try other HDMI connections on your TV. Picture enhancement functions: Temporarily disable any picture enhancement features on your TV, such as noise reduction or motion smoothing, to see if this solves the problem. Contact support: If the problem persists, it may be advisable to contact Panasonic or Apple technical support. They can provide specific information about your model and possible solutions. It is important to note that different TV models and brands may have different settings and functions. Therefore, these suggestions are general in nature and it may be necessary to refer to your Panasonic TV user manual or contact support directly for specific assistance.

Yes, the Apple A15 Bionic chip is built in and the model also has a Gbit Ethernet port (make sure you get the version, because the cheaper 64GB model has no thread support and no Ethernet port either).

These are worlds apart, an Apple TV 2nd gen has an ancient A4 processor that had 1.6 Gflop processing power and a core that was at most 1GHz fast. It couldn't do 4K UHD either. The new Apple TV model has the A15 processor, with 6 cores that can do over 3 GHz and that is enough for 1600 Gflops, so 1000x more computing power and 4K UHD can also the new. but always buy only the 128 GB version (only that has Matter, Ethernet and just more memory). Long story short, yes the new Apple TV 3rd gen box is worlds better and faster than anything Apple TV has ever been.

Due to different suppliers and delivery conditions, there may be price differences compared to other suppliers. We always try to offer a price in line with the market. However, this is not possible for all products.

The Apple TV 4K (3rd generation) has an HDMI output for the picture and no optical audio output. Instead, the audio output can be via the HDMI connection, which supports Dolby Atmos. An external HDMI optical converter may be required for a separate audio output to the amplifier, as the Apple TV 4K does not offer optical audio output.

Yes, as soon as it goes online with your Apple ID for the first time, you get the 3 months.

The Apple TV 4K (3rd generation), identified by the product ID "MN893FD/A", does support Ethernet connectivity. Specifically, the model with 128GB storage, which includes Ethernet, features a Gigabit Ethernet port in addition to Wi-Fi 6 (802.11ax) with 2x2 MIMO.

Yes, you can use the Apple TV 4K (3rd generation) even if you don't subscribe to an Apple TV+ streaming service. Here are some ways you can use the Apple TV 4K without Apple TV+: - Rent or buy films and series: You can rent or buy movies and series from the iTunes Store and watch them directly on your Apple TV 4K. - Other streaming services: You can also use other streaming services such as Netflix, Prime Video, Disney+, Hulu, YouTube TV and many more as they are available on the Apple TV 4K. - Apple Music and Apple Arcade: You can also use Apple Music and Apple Arcade to listen to music or play games. - Smart Home Hub: The Apple TV 4K can also act as a smart home hub to control your smart home devices. - Photos and other Apple services: You can also view your photos and other content from your Apple devices on the Apple TV 4K. The Apple TV 4K therefore offers a wide range of possible uses, even without the Apple TV+ streaming service.

With the Apple TV 4K (3rd generation) you can play videos from an external hard drive, but there are some limitations and requirements: ## Video formats The Apple TV 4K supports various video formats, but not directly via an external hard drive. It supports formats such as H.264, HEVC, MPEG-4, but not MKV by default. ## Apps for video playback You can download apps like Infuse that support MKV and other video formats. Infuse is a popular app for the Apple TV that can play a wide range of video formats, including MKV. ## External hard drive The Apple TV 4K does not have USB ports, which means that you cannot connect an external hard drive directly to the device. You will therefore need to use other methods to transfer your videos to the Apple TV, such as over the network or by uploading to iCloud or other compatible services. To summarise: You can use apps such as Infuse to play MKV files and other video formats on the Apple TV, but you will need to transfer these files to the device via the network or other compatible methods, as a direct connection to an external hard drive is not possible.

Yes, it is possible to connect the Apple TV 128GB (3rd Generation) to your older Philips 4K TV and control many functions with the Apple remote control. Here are the relevant details: - The Siri Remote of the Apple TV 4K (3rd Generation) has Bluetooth 5.0 and an IR transmitter, which makes it possible to control the TV as well as the receiver via IR or CEC (Consumer Electronics Control). - You can use the Apple remote control to switch the TV on and off and adjust the volume, provided that your Philips TV supports CEC or IR functions. - The Apple remote control also offers intuitive control for volume and other TV functions, making it unnecessary to use the original TV remote control. Make sure CEC is enabled on your Philips TV to fully utilise these functions.

Yes, the Apple TV 4K (3rd generation) with 128GB storage you are referring to has an Ethernet connection. The model with Wi-Fi and Ethernet offers a Gigabit Ethernet connection in addition to Wi-Fi 6 (802.11ax) with 2x2 MIMO.

Hi , if you don't have an iPhone the Apple tv will still work , but you will have to make a new registration for a new Apple account , by going to the Apple site from the Computer . But you will use the Apple TV to 40 % of its potential without an iPhone or a Mac or an IPad . Hi

Yes, once you have set up the box with your Apple ID, you can activate the AppleTV+ for 3 months.

Ideally, the Sonos soundbar is connected to the TV via HDMI. (HDMI ARC connection) All modern TVs actually have this. Then you can control the soundbar directly with either the Apple TV Remote or the TV remote control, which is 1000x more practical than always adjusting the volume via the Sonos app

No

1. the Apple TV devices offered by Salt are in no way different from any other. You can connect a "third-party" Apple TV without any problems and answer the question about the TV provider with "Salt" during installation. It will work in exactly the same way as with an Apple TV supplied by Salt. 2. of course. Attention: Check the Salt contract conditions. If you cancel before the agreed contract term, the price of the Apple TV must be refunded pro rata. (The Apple TVs are not "pre-configured" by the provider. tvOS simply asks for the TV supplier, who can then carry out a passwordless login based on the IP address).

Ich kenne leider keine direkte Antwort, hoffe aber dass Dir folgende Links evtl. weiterhelfen können: https://discussions.apple.com/thread/8540149?sortBy=best Auszüge: "So long story short, UHD enables HDR and Dolby Vision for video but disables Atmos Audio. You can’t have both HDR and Atmos. Don’t ask me why. Hopefully a firmware update fixes that." "Notice the last line, that describes what might prevent Dolby Atmos: “You can't play sound in Dolby Atmos if Quick Start is turned off in Settings. To check, go to Settings﹥Apps﹥iTunes Movies and TV Shows﹥Quick Start.”" Dann noch zwei offizielle Links von Apple: https://support.apple.com/en-us/102218 https://discussions.apple.com/thread/250076610?sortBy=best Und Reddit: https://www.reddit.com/r/appletv/comments/9gv8e7/updated_apple_tv_4k_with_ios12_and_its_only/ Was mir auf jeden Fall aufgefallen ist dass ganze viele die gleiche Frage haben mit dem Receiver Onkyo TX nr-686 Ich hoffe dies kann Dir irgendwie weiterhelfen

yes, it works. it's called screen synchronisation. if you have old ios/macos versions, check it again to be on the safe side

The one I received was the 4k version.

Since your TV is older, you will have to use the HDMI cable, then it should actually work.

We purchase the two versions from different suppliers and therefore it is possible that we can offer the Gen 3 at a lower price at the moment.

No, as only one stereo pair can be used.

3 questions - 3 answers. I have replaced Plex as a player on ATV, iPhone, iPad and Mac with Infuse, as Infuse plays Dolby Vision (although not all profiles, but that's going too far here). I only use Plex as a server. Both Plex and Infuse can basically play 4K/2160p x265. Wifi and Ethernet: if this is a choice for you - wired (i.e. Ethernet). The bottleneck with the Wi-Fi for your files mentioned is not the AppleTV, but the Wi-Fi signal available at the location of the AppleTV (and interference from other Wi-Fi devices there).

The answer to all your questions is yes, you can play MKV and other videos using the Infuse app and other apps. Sound can be streamed via AirPlay or HDMI ARC to an A/V receiver or amplifier. The ARTE TV and Play RTS apps can be used to broadcast or rebroadcast content from these channels. There's an option to view photos in random order in the Apple Photo app.