Ponal Wood glue Classic
120 gOnly 1 piece in stock
Weight2
Product details
Ponal Wood Glue Classic - for crafting and for assembly, surface, and joint bonding
This craft and wood glue impresses with its high bonding strength and is ready to use. It is perfect for crafting, bonding wood joints, or for assembly bonding (dowels, grooves, tongues, slots, and tenons), as the wood adhesive is solvent-free and non-discoloring. Additionally, the glue is suitable for joint bonding (solid wood edge banding) and surface bonding (laminated boards, hardboard, veneer edges, etc.). For clean and precise bonding, the glue bottle features a resealable tip that allows for accurate dosing for tidy work. Wood glue that may seep out during the joining of surfaces can be easily removed with water, leaving no unsightly residues visible. Thanks to its transparent color, the adhesive is ideal for inconspicuous bonding of wood. After approximately 12 hours, Ponal wood glue reaches its final strength.
Application:
1. First, ensure that the surfaces to be bonded are accurately fitted, grease-free, residue-free, and clean.
2. Apply the glue thinly on one side using a glue comb or glue roller. For hardwood or end grain, apply on both sides. Avoid contact with iron-containing tools when applying the glue. Depending on room temperature, air and wood moisture, as well as the amount of glue applied, the open time is a maximum of 12 minutes at 20°.
3. Join the surfaces while the wood glue is still wet.
Product advantages in detail:
- Wood and craft glue for crafting and bonding
- High bonding strength
- For assembly, surface, and joint bonding
- Non-discoloring
- Color: Transparent
- Format: 1x120g bottle.
type of adhesive | Wood glue |
Material application | Wood |
Area of use | Inside |
Documents |
Item number | 5633917 |
Manufacturer | Ponal |
Category | Glue |
Manufacturer No. | PN15 |
Release date | 8.9.2021 |
Colour | White |
Exact colour description | White |
Material group | Wood |
Material | Wood |
type of adhesive | Wood glue |
container shape | Flask |
Material application | Wood |
Area of use | Inside |
Country of origin | Germany |
CO₂ emissions | 0.06 kg |
Climate contribution | CHF 0.11 |
Length | 140 mm |
Width | 65 mm |
Weight | 120 g |
Length | 14.10 cm |
Width | 6.80 cm |
Height | 2.90 cm |
Weight | 140 g |
Instructions for use | Substrate preparation: Substrates must be clean, free of grease and dust, dry and fit perfectly. Almost all absorbent and non-absorbent materials are suitable as substrates. The substrates must be firm, clean and free of release agents. Remove release agents with a suitable solvent, e.g. alcohol, or sand the surface. A prerequisite for the adhesive to set is the absorption of small amounts of moisture (from the air or one of the materials to be bonded). Always check coatings for adhesion and remove if necessary. If possible, cover the surrounding area and work surfaces and work on an underlay. |