PiL THEOS/THEOS-LUM+MAXI

Series of LED street lights available in two versions: die-cast aluminium housing painted with grainy grey polymer powder coating after prior chemical surface treatment. Locking ring in painted die-cast aluminium with polyester powder coating, after prior chemical treatment, is captively connected to the housing by a joint. Fixing part for poles made of die-cast aluminium, painted grainy grey, suitable for poles with a diameter of 60 mm or 76 mm. Optics made of technopolymer lenses with increased light transmission. Depending on the model, the following optics are available: SR. 075 for narrow roads with a ratio of road width to mast height (B.H) up to 0.75, SR. 100 for two-lane roads with a B.H of 1, SR. 125 for wide roads with a B.H of 1.25, and SR. 150 for wide roads with a B.H ratio equal to 1.5. The secure light distribution system guarantees uniform light distribution even when an LED is defective. Complies with the UNI 10819 standard and regional laws on light pollution. Gasket made of resistant silicone with increased resilience. Diffuser made of extra-clear tempered safety flat glass. Line disconnect plug automatically cuts off the power supply when the ring is opened. Features a powerful electronic ballast and includes an additional protective device against mains overvoltages up to 10 kV. Power connection via quick-connect external IP66 socket/plug, including cable that allows connection to the mains without opening the light fitting, made of PA66 with silver-plated brass contacts, suitable for cable diameters of 9-12 mm. External screws made of stainless steel. For information on other colour temperatures and the colour rendering index, please contact the factory. A version with a 7-pin NEMA connector for connection to external remote control systems is also available. CLO (Constant Light Output) option available.