PHS-memory RAM suitable for HP ProLiant DL580 Gen8 (G8)

This 8GB memory is 100% compatible with HP ProLiant DL580 Gen8 (G8).
Which memory configuration is possible? Our memory team will be happy to assist you in choosing the right memory and configuration for your server.Technologymax. Ram per CPUmax.Ram 2 x CPUmax.Ram 4 x CPUMaximum Ram configuration (6 x 4 memory slot = 24 memory slot per CPU)UDIMM ECC128GB (16 x 8GB UDIMM ECC)256GB (32 x 8GB UDIMM ECC)512GB (64 x 8GB UDIMM ECC)RDIMM384GB RAM (24 x 16GB RIMM)768GB (48x16GB RDIMM)1,5TB (96x16GB RDIMM)LRDIMM1.5TB RAM (24 x 64GB LRDIMM)3TB (48x64GB LRDIMM)6TB (96x64GB RDIMM)Registered DIMM and Load Reduced LRDIMM memory modules may not be mixed.not be mixed. When upgrading, you should therefore know which memories are already available or upgrade completely with LRDIMM memory.Principles of memory configurationA CPU is equipped with 2 memory controllers. Each memory controller has 2 SMI (Scalable Memory Interface) with up to 6 memory slots. Thus, a CPU can address up to 24 RAM memories (2 controllers x 2 SMI x 6 DIMM slots)Registered DIMM and Load Reduced LRDIMM memory modules must not be mixedWhen upgrading, you should therefore know which memories are already available or upgrade completely with LRDIMM memory.Memory slots for which no processor is available must not be populatedMemory configuration for good system performanceOptimum performance is achieved by using 4 or 8 identical memories per CPU.With 8 DIMMs (1 DimmPerChannel), 16 DIMMs (2 DPC) or 24 DIMMs (3 DPC) per CPU, interleaving is optimally supported via the memory controllers and memory channels. This enables maximum performance in independent mode and lockstep mode. 2 DIMMs, 6 DIMMs or 10 DIMMs per CPU are not recommended.If there is more than one CPU, the memories per CPU should be populated identically (mirrored to the other CPU).