PHS-memory RAM suitable for Fujitsu Primergy TX300 S6

This 8GB RAM is 100% compatible with the Fujitsu Primergy TX300 S6.

Information on memory configuration: The following technical specifications should be considered in advance: ECC DIMM (with Error-Correction-Code) or RDIMM (Registered DIMM) RAM can be installed in the device. RDIMM memory is recommended for achieving large memory capacities. The different memory technologies (ECC / RDIMM) must not be mixed. If a memory upgrade is to be made with the existing RAM, it must be checked which memory technology (ECC / RDIMM) is present. A higher memory clock of the memory module automatically adjusts to the memory clock set by the system, which can especially be the case with larger capacities. Memory slots without a processor must not be populated.

Technology GB / Module Count Total Maximum Capacity by Memory Technology: UDIMM ECC 8GB RAM 18 144GB, RDIMM 16GB RAM 12 192GB, RDIMM 32GB RAM 12 384GB.

Principles of memory configuration: The memory slots are organized in groups of three. In each group of three, a maximum of 2 slots can be used for UDIMM ECC memory. In each group of three, a maximum of 2 slots can be populated with 4Rank RDIMM memory. The different groups of three slots do not have to have the same capacities.

Memory configuration for good system performance: Distribute the memory evenly across the memory slots and evenly across the CPUs. With three identical memories per group of three slots, performance can be up to three times faster compared to populating the group of three slots with only one memory. If more than one CPU is present, the RAM should be configured identically (mirrored to the other CPU) per CPU.