PHS-memory 16GB RAM memory for Fujitsu Primergy RX300 S7 DDR3 RDIMM 1600MHz

This 16GB RAM is 100% compatible with the Fujitsu Primergy RX300 S7. What memory configuration is possible? Our memory team is happy to assist you in choosing the right RAM and configuring your server.

Technology:
1 CPU: 12 slots
2 CPU: 24 slots

Maximum RAM expansion based on the number of CPUs and memory slots:

• UDIMM ECC: 64GB RAM (8 x 8GB), 128GB RAM (16 x 8GB)
• RDIMM: 192GB RAM (12 x 16GB), 384GB RAM (24 x 16GB)
• LRDIMM: 384GB RAM (12 x 32GB), 768GB RAM (24 x 32GB)

Principles of memory configuration:
Each CPU has 4 memory channels, each with 3 memory slots. ECC DIMM, Registered DIMM, and Load Reduced LRDIMM memory modules must not be mixed. When upgrading, you should know what memory is already installed or upgrade completely to RDIMM or LRDIMM memory. When using ECC UDIMM memory, only 2 out of 3 memory slots per memory channel can be populated. Memory slots without a processor present must not be populated. Higher memory frequencies may adjust to other memory clock rates in the system environment and support correspondingly slower clock rates. Low Voltage memory with 1.35V will be clocked at 1.5V when mixed with 1.5V memory due to the fallback option available in the memory.

Memory configuration for good system performance:
Distribute the memory evenly across the memory slots and evenly across the CPUs. If more than one CPU is present, the memory should be configured identically (mirrored to the other CPU) per CPU.