Peha Radio

The bidirectional Easyclick receiver not only receives radio signals but also sends its status back with every change in state. Real switching states ON/OFF can be visualized, for example, on the handheld transmitter D 450 FU-HS 128. The Easyclick receiver is used for controlling lighting and other electrical consumers. Various functions and parameters can be selected:

• Two-button operation (standard function ON/OFF)
• Single-button operation (toggle ON/OFF)
• Button operation (pulse)
• Hotel card switch with selectable delay time
• Staircase lighting with selectable duration and shut-off warning
• Automatic OFF after selectable duration
• Fan function with delayed ON and selectable delay time
• Save and recall 4 light scenes with a button press (one light scene per button)
• Window handle and window contact, visualization also parallel to the switching outputs
• Motion detector and light sensor
• For each learned maximum of 32 transmitters, an individual function can be assigned. The channels can be programmed independently of each other.
• Regardless of the set functions, integrated repeater functions (1-level/2-level) can be activated depending on the project.
• When learning, for example, window contacts, window handles, and motion detectors, these are already assigned to the corresponding function/parameter.

Technical data:
Power consumption: < 0.5 W (bistable relays)
Transmission frequency: 868.3 MHz
Power supply: 100-240 V~/50-60 Hz
Neutral conductor: required
Ambient temperature: -20 °C to +40 °C
Storage temperature: -40 °C to +85 °C
Terminal blocks: max. 1 x 1.5 mm²
Housing height: 28 mm
Protection class: IP 20
Mounting tabs: for screw mounting in switch boxes
Approvals: CE, KEMA/KEUR

Load types 230 V~ (110 V~)
Incandescent lamps 500 W (250 W)
HV halogen lamps 100 W (50 W)
Motor load 100 VA (50 VA)
Electronic ballast load 1 piece (1 piece)

The number depends on type and manufacturer. The device's data sheet must be observed!.